Refine
Year of publication
Document Type
- Conference Proceeding (115)
- Part of a Book (66)
- Contribution to a Periodical (27)
- Article (13)
- Lecture (7)
- Working Paper (4)
- Book (3)
- Internet Paper (2)
- Report (2)
Is part of the Bibliography
- no (239)
Keywords
- 02 (15)
- 03 (10)
- 04 (1)
- 5G (2)
- 7. EU-Forschungsrahmenprogramm (1)
- AI (2)
- APMS (1)
- APS (1)
- Aachener PPS-Modell (1)
- Ablauforganisation (1)
Institute
- FIR e. V. an der RWTH Aachen (239) (remove)
The need for a theoretical consideration of the influence of manipulable variables in various evaluation dimensions on the economic efficiency of a production system is obvious. Here it is necessary to link the relevant influencing variables and their mutual dependencies into a model, which represents the basis for the determination of the optimal operating points of the production system. In this model, formal sub-models are to be analysed and integrated, assur-ing that the state of research from various technical disciplines in production engineering, such as manufacturing technology, machine tools, logistics and production planning and control, are used to quantify the economic effect of the influencing variables.
Aus Sicht der logistischen Planung und Steuerung stellt die Beherrschung der steigenden Dynamik in der kundenindividuellen Produktion und Montage die wesentliche Herausforderung der kommenden Jahre dar. Ursachen der zunehmenden internen Dynamik sind kürzere Lieferzeiten, eine höhere Varianz der Fertigungs- und Montageprozesse (verursacht durch die zunehmende Produktvielfalt) und der Einsatz komplexer Produktionsanlagen (Substitution des Faktors Arbeit durch Kapital). Die drastische Verkürzung der Lieferzeiten hat die Auftragssituation und den Kapazitätsbedarf produzierender Unternehmen maßgeblich verändert. Die notwendigen Durchlaufzeitreduzierungen konnten nur durch eine entsprechende Reduzierung der Umlaufbestände erreicht werden. Diese Bestandssenkung hat zwangsläufig zu einer stärkeren Kopplung der einzelnen Produktionsressourcen untereinander geführt. Kapazitätsschwankungen und Prozessinstabilitäten einer Einzelressource wirken sich auf Grund der stärkeren Kopplung stärker auf die Stabilität des Gesamtsystems aus, da der Bestand nicht mehr als Dämpfer wirken kann. Gleichzeitig nehmen makroskopische, überbetriebliche Kapazitätsschwankungen in der Lieferkette zu, da die zeitliche Dämpfung fehlt.
Die steigende Varianz der Prozessketten und -zeiten verstärkt potenziell den Effekt der beschriebenen Kapazitäts- und Durchlaufzeitschwankungen. Eine „mittelwertbasierte PPS“ ist daher nicht mehr anforderungskonform. Herkömmliche Planungs- und Steuerungskonzepte, die auf diese Varianz nicht entsprechend reagieren können, tragen so unweigerlich zu einem weiteren Aufschwingen des Systems bei. Die fehlende Dämpfung führt bei schwankenden Bedarfen zu Auslastungsverlusten und steigenden Rückständen in der Produktion.
Eine Absorption der Dynamik durch Bestände und Entkopplung oder das Vorhalten von Reservekapazitäten zur Prozesssynchronisation sind heute aus Gründen des Kostendrucks und kundenindividueller Produkte nicht mehr möglich. Vielmehr sind neue Ansätze in der Planung und Steuerung von inner- und überbetrieblichen Produktionsprozessen notwendig, die die Dynamik der Prozesse und Kapazitätsbedarfe aufnehmen können, diese in Bezug zum übergeordneten Auftragsnetz bringen und Lösungen zur Absorption der Dynamik unter Berücksichtigung der wirtschaftlichen und logistischen Zielsetzungen ableiten lassen.
European machinery and equipment manufacturers face multiple logistical challenges in their daily business. Interacting in complex non-hierarchical production networks and thus living with the consequences of a lack of transparency, temporal instability, or imbalanced share of market power finally leads to an inadequate OEM’s delivery adherence which in many cases can be traced back to suppliers’ late deliveries.
This paper presents a framework for improving delivery reliability in non-hierarchical production networks by applying market mechanisms. Knowing the financial consequences of a supplier’s belated delivery provides useful information which can be applied in terms of financial incentives. The framework is supported by the results of a study which has been conducted by the authors throughout German, Spanish, and Italian machine tool manufacturers and their suppliers.
Funktionen
(2012)
Die Aufgaben der PPS werden in den direkten und indirekten Bereichen in Fertigungsunternehmen als Funktionalitäten in Informations- bzw. Anwendungssystemen umgesetzt. Informationssysteme unterstützen die Verwaltung und Bereitstellung von Informationen, die Erstellung von Plänen, die Koordination von Abteilungen, die Überwachung und Steuerung von Prozessen und weiteres.
Organizations, of all sizes, in every domain and in all geographies, are facing growing challenges to comprehend the scope of social media based technologies for their internal process use and for their networks. To assist the CIO’s and executives, FIR has developed a tool based framework to evaluate the impact of social web based collaborative technologies to support knowledge intensive processes. The FSI framework extends organizational spectrum to three categories of Formal, Semi-formal and Informal. The FSI tool places the emphasis on both business process and IT level.
The FSI framework and approach are validated in conjunction with industrial and research clients as test cases. Initial finding, reflected in this article, show a dire mismatch between the process exploitable potential level and organizational ICT profile. At the end, a set of recommendations are included for the organizational management to consider for organizational transformation.
Prozessarchitektur
(2012)
Das Aachener PPS-Modell beschreibt Aufgaben, Prozesse und Funktionen für die Produktionsplanung und -steuerung in verschiedenen Referenzsichten. Dabei liegt der Fokus auf den unterschiedlichen Aspekten der Planung und Steuerung inner- und überbetrieblicher Produktion. Die Unterscheidung in inner- und überbetriebliche Aufgaben wurde bereits im Aufgabenmodell dargestellt. Betrachtet man die Produktion in Netzwerken, so wird deutlich, dass nicht alle Aufgaben durch einen Netzwerkpartner abgedeckt werden können. Die kooperative Leistungserstellung macht es erforderlich, dass die Erfüllung einzelner Teilaufgaben durch unterschiedliche Netzwerkpartner koordiniert wird. Für die PPS in Produktionsnetzwerken werden daher die Netzwerkebene und die Ebene der einzelnen Unternehmung unterschieden.
To monetize the potential of digitalization in times of saturated markets, increased machinery and plant engineering companies are starting to transform the transaction-based business model into a customer- and service-oriented subscription business. Even though subscription offerings can create win-win situations for providers and customers, companies encounter significant difficulties in acquiring customers for this innovative business model. Historically linear acquisition processes focused on transactional product sales impede success. To identify key challenges and targeted coping strategies for customer acquisition we conducted in-depth interviews with 18 subscription managers and sales representatives from seven machinery and plant engineering case studies. In our research we uncovered four challenge dimensions: (1) lack of motivation, (2) missing skills and competences, (3) insufficient customer confidence and (4) transaction-oriented sales approach. Beyond that we derived four appropriate coping strategies (1) steering mechanisms, (2) human resource management, (3) trust building instruments and (4) systematic methodology to address them. These insights highlight the key challenges at the management level for customer acquisition that companies face when trying to initiate and sustain the transition from a purely transactional product and service business to subscription-oriented growth. Furthermore, they provide guidance how to cope with these challenges.
The planning and implementation of migration projects in global production networks is a complex planning task that is confronted with a dynamic global environment with highly complex interdependencies. Today's migration approaches are either large projects or isolated local
investments. As such, they are not suitable for simultaneously addressing interdependencies and continuity. This paper illustrates a holistic and continuous methodology for rolling migration planning and implementation in global production networks. Seven steps enable the transformation from the current state of the production network into a target state regarding internal as well as external dynamics and interactions.
The number of cyber-attacks on small and medium enterprises (SMEs) is constantly increasing. SMEs do not recognize the attacks until the damage has occurred. Only then, they fight with measures to increase IT-security and IT-safety. Many studies come to the point that this refers to a lack of budget, expertise and awareness of the need for IT-security. There are many compendia with recommendations for action, but they are too comprehensive and unspecific to the individual needs of SMEs. In this paper, we present the results of a research activity on the gaps that address the challenges faced by SMEs. In addition, we develop a concept for a serious gaming approach that includes an economic perspective on IT-security measures and shows how SMEs can derive their own IT-seurity target state
Numerous traditional, agile and hybrid development approaches have been proposed for the development of CPS. As the choice of development process is crucial to the success of development projects, it has become a major challenge to identify the best-suited process. This paper introduces a methodology for identifying the best-suited CPS development process, based on the individual boundary conditions for a certain development project within a company. The authors used a set of eight indicators to assess a CPS-development project. The results of the assessment were matched with CPS-development approaches. Based on the matching results a best-suited development process was selected. The application is shown for a use case in the German manufacturing industry. The developed method aims to reduce the risk of project failure due to the wrong choice of development process.
Unvorhergesehene Störungen gefährden in vielen Fällen den Kundenliefertermin. Die Produktionssteuerung hat die Aufgabe, effektiv und effizient auf diese kurzfristigen Störungen zu reagieren. Der Entscheidungsprozess beruht jedoch häufig auf einer qualitativen Analyse einer komplexen Situation anhand subjektiver Einschätzungen durch den Produktionsplaner. Zur Verbesserung der Entscheidungsfindung stellt dieser Beitrag eine App vor, die auf Basis von Echtzeitdaten und einer Simulation des Produktionssystems eine quantitative Entscheidungsfindung ermöglicht.
Die Variantenfließfertigung ermöglicht die Herstellung konfigurierbarer Produkte bei kurzen Durchlaufzeiten und geringen Beständen. Im Vergleich zu anderen Organisationsformen der Produktion gestaltet sich die Produktionsplanung und -steuerung aufgrund der Variantenvielfalt als anspruchsvoll. Im vorliegenden Beitrag wird der erste Schritt einer Methodik vorgestellt, welche für die Konfiguration der Reihenfolgeplanung entwickelt wurde.
Störungen und Änderungen des Produktionssystems führen zu Kosten und Aufwänden, bieten jedoch auch die Chance zur kontinuierlichen Verbesserung.
Um Änderungsanfragen zu erfassen, können etablierte Ansätze genutzt werden. Diese vernachlässigen jedoch die Anforderungen, denen sich ein Produktionssystem im Zeitalter der Digitalisierung ausgesetzt sieht. Der vorliegende Beitrag stellt einen Ansatz zur standardisierten Erfassung von Änderungsanfragen vor, welcher die Ausgangsbasis für die Bewertung von Änderungsanfragen in bestehenden IT-Systemen bietet.
Eine wesentliche Bedingung zur Optimierung der Wertschöpfungsprozesse ist die Transparenz über die leistungsbestimmenden Faktoren eines Unternehmens. Die Ermittlung dieser Faktoren stellt für viele Industriebetriebe eine Herausforderung dar. Im Rahmen der Veröffentlichung wird daher eine Vorgehensweise zur systematischen Identifikation von Einflussfaktoren der Unternehmenskennzahlen vorgestellt, welche die Grundlage zur Ableitung von individuellen Stellhebeln zur Steigerung der Unternehmensleistungsfähigkeit darstellt.
A large number of product-accompanying services in the machinery and plant engineering industry is based on the cross-company exchange of data and information. By providing services, additional sales potential on the manufacturer side as well as far-reaching product and process advantages for appliers can be reached. However, the necessary cross-company exchange of information is nowadays limited due to a lack of trust in the interacting partner and the applicable existing technologies, which results in significant losses in the terms of business potential. The uncovering of this potential now seems to be made possible by the use of the Blockchain technology. Through the key factors security, immutability, transparency and decentralisation, it serves as an enabler for cross-company communication and product-accompanying services. The technological implementation of a Blockchain can take on a broad spectrum of attributes, which can lead to decisive restrictions for the execution of services. This justifies the necessity for a qualified and context-related assessment of service-types-individual specifications and the resulting requirements on the system. Within the scope of this paper, different types of product-accompanying services are identified and analysed regarding their requirements for a Blockchain-based machinery and plant connection. This can serve as a basis for a qualified and goal-oriented configuration of the Blockchain.
Die Blockchain-Technologie (BCT) ist eine der vielversprechendsten Technologien der Gegenwart, die in Zukunft insbesondere für produzierende Unternehmen eine noch größere Bedeutung haben wird, um die unternehmensübergreifende Zusammenarbeit zu verbessern und Prozesse gegenüber dem Kunden transparenter zu gestalten. Trotzdessen wird die BCT als vertrauensschaffendes Instrument noch nicht in der Breite angewendet. In diesem Beitrag werden neben den Potenzialen die Herausforderungen für den Einsatz der BCT erörtert und auf Basis des St. Gallener Management-Modells ein Lösungskonzept hergeleitet, welches dem potenziellen Anwender der BCT mögliche Anwendungsszenarien aufzeigt.
Digital networking via the company and as well, the overall supply chain, can only succeed if digital planning reflects reality as accurately as possible and if production control can react to deviations in real time. In essence, this leads to a development of process control towards process regulation. While longterm production and resource planning is usually mapped by Enterprise Resource Planning (ERP) systems, detailed planning, including short-term deviations and real-time data at the production level, is increasingly supported by Manufacturing Execution Systems (MES) at the production control level. However, in order to bring the underlying system concepts into line with Industry 4.0 efforts in a standardized manner, mutual functional integration within the framework of interoperable production planning and control is of crucial importance. For this purpose, studies were carried out in particular into cause-effect relationships. Thus, the overarching research objective is a valid design model to increase the controllability of production planning and control systems (PPC) in the context of Industry 4.0.
Schlüsselfaktoren für den industriellen Einsatz Additiver Fertigung in produzierenden Unternehmen
(2020)
Die Additive Fertigung (AM) ist insbesondere als Hilfsmittel bei der Produktentwicklung weit verbreitet. 71 Prozent der produzierenden Unternehmen setzen AM für die Fertigung von Prototypen und Pilotserien ein. Derzeit eignet sich AM jedoch nicht mehr nur für die Fertigung von Prototypen und Pilotserien, sondern gewinnt auch zur Herstellung von Endprodukten aus metallischen Werkstoffen an Bedeutung. Der vorliegende Beitrag verfolgt das Ziel, Schlüsselfaktoren zu identifizieren, die den industriellen Einsatz von AM in produzierenden Unternehmen am stärksten prägen. Damit wird zugleich die Grundlage geschaffen für ein systematisches Vorausdenken der Zukunft.
Smartification and digital refinement of products to enable the design of smart ones is a pivotal challenge in the manufacturing industry. Companies fail to design smart products due to missing knowledge of digital technologies and their integral part in product development processes. This paper presents a methodology that enables the derivation of digital functions for smart products through selected cases in manufacturing usage. We develop a morphology that consists of digital functions for smartification. In this context, we explained and derived characteristics by a set of examples regarding smart products in the manufacturing industry. Our methodology reduces the time spent initiating a development project with the focus on smartification.
Aktuell ist noch nicht geklärt, wie sich das Zusammenwirken von Menschen und betrieblichen Anwendungssystemen bei der Bearbeitung der Aufgaben der PPS nach der Umsetzung von Industrie 4.0 entwickelt. Zur Systematisierung der Auswirkungen von Industrie 4.0 auf die PPS werden in diesem Beitrag die sechs Reifegradstufen des acatech Industrie-4.0-Maturity-Index mit der Aufgabensicht des Aachener PPS-Modells kombiniert und die Reifegradstufen für ausgewählte Unteraufgaben der PPS spezifiziert.
Auf Basis einer systematischen Literaturanalyse wurden insgesamt 11 Kennzahlen identifiziert, welche die Grundlage zur Beschreibung der operativen Leistungsfähigkeit von Unternehmen bilden. Die Kennzahlen wurden in die vier Leistungsdimensionen Effizienz, Qualität, Zeit und Flexibilität eingeteilt.
Manufacturing companies face the challenge of selecting digitalization measures that fit their strategy. Measures that are initiated and not aligned with the company’s strategy carry the risk of failing due to lack of relevance. This leads to an ineffective use of scarce human and financial resources. This paper presents a target system to help companies select relevant digitalization measures compliant with their strategy for IT-OT-integration projects. The target system was developed based on literature research and expert interviews, and later validated in two use cases. The target system considers the goals of production companies and combines them with digitalization measures. The measures are classified by different maturity levels required for their realization. Thus, the target system enables manufacturing companies to evaluate digitalization measures with regards to their strategic relevance and the required Industrie 4.0 maturity level for their realization. This ensures an effective use of resources.
The number of available technologies is constantly rising. Be it additive manufacturing, artificial intelligence (AI) or distributed ledger technologies. The choice of the right technologies may decide the fate of a company. Due to the overwhelming amount of information sources, regular technology market research becomes increasingly challenging, especially for SMEs. In order to assist the technology management process, the authors will introduce the architecture of an automated, AI-based technology radar. The architecture will automatically collect data from relevant sources, assess the relevance of the respective technology (i.e. their maturity level) and then visualize it on the radar map.
Die Dezentralität ist einer der bedeutsamsten Aspekte der Blockchain-Technologie. Dennoch gibt es große Unterschiede in der Dezentralität verschiedener Blockchain-Applikationen. Ziel der vorliegenden Arbeit ist es, eine strukturelle und funktionelle Durchdringung des Aspekts der Dezentralität zu erreichen und Eigenschaften zu finden, die es ermöglichen verschiedene Blockchain-Applikationen in ihrer Dezentralität zu differenzieren. Der vorliegende Beitrag legt dar, dass die Datenverteilung und die Zugangsberechtigungen (Lese- und Schreibzugang) entscheidende Eigenschaften für die Dezentralität der Blockchain Applikationen sind. Diese Eigenschaften werden mithilfe eine morphologische Analyse untersucht und es wird ein detaillierter Überblick über die verschiedenen Ausprägungen der genannten Eigenschaften und der Auswirkungen auf die Dezentralität gegeben.
Due to shorter product life cycles and the increasing internationalization of competition, companies are confronted with increasing complexity in supply chain management. Event-based systems are used to reduce this complexity and to support employees' decisions. Such event-based systems include tracking & tracing systems on the one hand and supply chain event management on the other. Tracking & tracing systems only have the functions of monitoring and reporting deviations, whereas supply chain event management systems also function as simulation, control, and measurement. The central element connecting these systems is the event. It forms the information basis for mapping and matching the process sequences in the event-based systems. The events received from the supply chain partner form the basis for all downstream steps and must, therefore, contain the correct data. Since the data quality is insufficient in numerous use cases and incorrect data in supply chain event management is not considered in the literature, this paper deals with the description and typification of incorrect event data. Based on a systematic literature review, typical sources of errors in the acquisition and transmission of event data are discussed. The results are then applied to event data so that a typification of incorrect event types is possible. The results help to significantly improve event-based systems for use in practice by preventing incorrect reactions through the detection of incorrect event data.
Industry 4.0 and Smart Maintenance represent a great opportunity to make manufacturing and maintenance more effective, safer, and reliable. However, they also represent massive change and corresponding challenges for industrial companies, as many different options and starting points have to be weighed and the individual right paths for achieving Smart Maintenance need to be identified. In our paper, we describe our approach to evaluating maintenance organizations in a case study for the oil and gas industry, developing a shared vision for the future, and deriving economical and effective measures. We will demonstrate our approach, by showcasing a specific example from the oil and gas industry, where a need for action on HSE-relevant critical flanges in the company's piping systems was identified. We describe the steps, that were taken to identify the need for action, the specifications of the project and the criticality analysis of the piping system. This resulted in the derivation of a digitalization measure for critical flanges, which was first commercially analyzed and then the flanges were equipped with a continuous monitoring solution. Finally, a conclusion is drawn on the performed procedure and the achieved improvements.
Subscription business transforms traditional business models of machinery and plant engineering. Many manufacturing companies struggle to pull out the potential created by Industry 4.0 and make it economically usable. In addition to technological innovations, it is necessary to transform the business model. This leads to a shift from ownership-based and product-centric business models to outcome-based business models, which focus on the customer's value and thus realize a unique value proposition and competitive advantage – the outcome economy. Based on a case study analysis among manufacturing companies, this paper provides further clarification including a definition and constituent characteristics of subscription business models in machinery and plant engineering.
Companies operate in an increasingly volatile environment where different developments like shorter product lifecycles, the demand for customized products and globalization increase the complexity and interconnectivity in supply chains. Current events like Brexit, the COVID-19 pandemic or the blockade of the Suez canal have caused major disruptions in supply chains. This demonstrates that many companies are insufficiently prepared for disruptions. As disruptions in supply chains are expected to occur even more frequently in the future, the need for sufficient preparation increases. Increasing resilience provides one way of dealing with disruptions. Resilience can be understood as the ability of a system to cope with disruptions and to ensure the competitiveness of a company. In particular, it enables the preparation for unexpected disruptions. The level of resilience is thereby significantly influenced by actions initiated prior to a disruption. Although companies recognize the need to increase their resilience, it is not systematically implemented. One major challenge is the multidimensionality and complexity of the resilience construct. To systematically design resilience an understanding of the components of resilience is required. However, a common understanding of constituent parts of resilience is currently lacking. This paper, therefore, proposes a general framework for structuring resilience by decomposing the multidimensional concept into its individual components. The framework contributes to an understanding of the interrelationships between the individual components and identifies resilience principles as target directions for the design of resilience. It thus sets the basis for a qualitative assessment of resilience and enables the analysis of resilience-building measures in terms of their impact on resilience. Moreover, an approach for applying the framework to different contexts is presented and then used to detail the framework for the context of procurement.
Task-Specific Decision Support Systems in Multi-Level Production Systems based on the digital shadow
(2019)
Due to the increasing spread of Information and Communication Technologies (ICT) suitable for shop floors, the production environment can more easily be digitally connected to the various decision making levels of a production system. This connectivity as well as an increasing availability of high-resolution feedback data, can be used for decision support for all levels of the company and supply chain. To enable data driven decision support, different data sources were structured and linked. The data was combined in task-specific digital shadows, selecting clustering and aggregation rules to gain information. Visual interfaces for task-specific decision support systems (DSS) were developed and evaluated positively by domain experts. The complexity of decision making on different levels was successfully reduced as an effect of the processed amounts of data. These interfaces support decision making, but can additionally be improved if DSS are extended with smart agents as proposed in the Internet of Production.
Mobilität in NRW neu denken
(2018)
Monetizing Industry 4.0: Design Principles for Subscription Business in the Manufacturing Industry
(2019)
Subscription business models have a major role for monetizing products and services for manufacturing companies in the age of Industry 4.0. As the manufacturing industry has difficulties generating revenues through digitalization, the implementation of innovative business models are essential to remain successful. Physical assets are often capital-intensive and require a more complex manufacturing process than subscription business models. Moreover, subscription models can focus on the individual customer benefit and a consistent service transformation, constituting a unique selling proposition and a competitive advantage. Hence, the following paper provides a management model that enables manufacturing companies to successfully realize the transformation towards a subscription business model. The management model presents four major fields of action, each matched with one design principle that must be considered when dealing with subscription models in the manufacturing industry. These principles were determined by an in-depth case study analysis among various manufacturing companies. Opportunities, challenges and recommendations for action were then systematically derived and integrated into the management model.
[Der Sammelband] Widmet sich den in Wissenschaft und Praxis aktuell intensiv diskutierten Fragestellungen zu Smart Services. Befasst sich mit Geschäftsmodellen, Erlösmodellen und Kooperationsmodellen von Smart Services. Geht auf branchenspezifischen Besonderheiten von Smart Services ein. (link.springer.com)
Klar Schiff
(2009)
Im Rahmen dieser Studie untersuchten das Forschungsinstitut für Rationalisierung e. V. an der RWTH Aachen und die Universität St. Gallen
(Lehrstuhl Produktionsmanagement) 24 Veröffentlichungen von 11 Beratungsunternehmen. Dabei wurden über 200 Aussagen zur Bewältigung der Krise bewertungsneutral identifiziert und analysiert.
In an increasingly changing market environment, the long-term survival of companies depends on their ability to reduce latencies in adapting to new market conditions. One strategy to meet this challenge is the anchoring of data-driven decision making, which leads to an increasing use of advanced information technologies and, subsequently, to an increase in the amount of data stored. The complexity of processing these data spurred the demand for advanced statistical methods and functions called Business Analytics. Companies are, despite all promised benefits, overwhelmed with the implementation of Business Analytics as indicated by a failure rate of 65 to 80 %. This paper provides an empirically validated, multi-dimensional model that takes an integrative look at critical success factors for the implementation
of Business Analytics and based on which management recommendations can be generated. For this purpose, constructs of the model are conceptualized, before a structural equation model is developed. This model is then validated with data from 69 industrial partners in the food industry. It is shown amongst others, that the three success factors top management support, IT infrastructure and system quality are pivotal to increase the company performance.
Zur Planung und Steuerung setzen Unternehmen der produzierenden Industrie heute auf umfassenden Softwareeinsatz. Deshalb begründen sie eine geringe logistische Zielerfüllung bezüglich Lieferfähigkeit und Liefertreue häufig mit Defiziten der Software. Doch Praxiserfahrungen zeigen, dass die Industrieanwender die Bedeutung organisatorischer Defizite in der innerund" überbetrieblichen Auftragsabwicklung deutlich unterschätzen.
Deshalb untersuchten die drei Institute
• Fraunhofer Institut für Produktionstechnik und Automatisierung IPA, Stuttgart;
• Forschungsinstitut für Rationalisierung FIR, Aachen sowie
• Laboratorium für Werkzeugmaschinen und Betriebslehre WZL der RWTH
Aachen
den Einfluss dieser Defizite auf die Lieferterminermittlung und -erfüllung. Ausgangspunkt der Studie waren Thesen, die eine qualitative Befragung der Produktions- und Logistikverantwortlichen verifizieren sollte.
Blockchain as Middleware+
(2019)
In supporting decision making of manufacturing companies, the added value of cross-domain data exchange for aggregating information is well established in enterprise organization research and is represented, for example, in the reference model “Internet of Production” (IoP). Currently, there is little research regarding the role of Blockchain technology in such a reference model and how specifically the IoP needs to be expanded to address cross-company data exchange. This paper presents a proposal for such an extension to outline the use of Blockchain technology and to elaborate the open research demands for implementation. In particular, desk research and the development of concrete use cases for cross-company data exchange between business application systems were carried out. The results are, on the one hand, extending the IoP by a third dimension, which corresponds to the supply chain, and, on the other hand clarification of the role Blockchain technology can take in this context.
This paper won the John Burbidge Best Paper Award (see Attachment 2).
Industrie 4.0 bringt enorme Veränderungen und bietet große Verbesserungspotenziale für die Produktionsplanung und -steuerung. Aufbauend auf dem Aachener PPS-Modell wird in diesem Beitrag in Anlehnung an den Industrie-4.0-Maturity-Index der acatech eine reifegradbasierte Untersuchung der Entwicklung der Produktionsplanung und -steuerung im Kontext von Industrie 4.0 präsentiert.
Künstliche Intelligenz (KI) hat sich über die letzten Jahre stetig zu einem Thema mit strategischer Priorität für Unternehmen entwickelt. Das zeigt sich nicht zuletzt in der gesteigerten Investitionsbereitschaft deutscher Unternehmen in KI-Projekte. Wirtschaftliche Akteure haben erkannt, dass durch eine sinnvolle Nutzung von KI-Technologien Wettbewerbsvorteile erzielt werden können. Die vorliegende Studie legt das Augenmerk auf den industriellen Einsatz einer KI-Technologie, die bereits heute von vielen Unternehmen erfolgreich genutzt wird: Die natürliche Sprachverarbeitung (engl. Natural Language Processing, kurz NLP). Die wirtschaftlichen Potenziale der Technologie liegen dabei in ihrer Fähigkeit, betriebliche Abläufe zu automatisieren und die Schnittstelle zwischen Mensch und Maschine zu verbessern und zu vereinfachen. Ziel der Studie ist es, die Potenziale der NLP-Technologie für Unternehmen nutzbar zu machen, indem konkrete Anwendungsfälle und allgemeine Handlungsempfehlungen sowie Nutzen und Risiken aufgezeigt werden.
Through data-based insights into customer behavior, products and service offers can be improved. For manufacturing companies, smart product-service systems (SPSS) offer the possibility to collect customer data during the usage phase of the product. As the focus on customer analytics is too often on sales and marketing, SPSS are overlooked as a source of customer data. However, manufacturing companies need to integrate data from all interactions with their customers along the complete customer journey to achieve a holistic data-based view of the customers. To identify these interactions and the customer data derived from them, the concept of a digital shadow will be applied to the customer journey. The projected results for the presented work in progress are a reference process model for the customer journey in manufacturing and a data model of the customer data created along this process.
The digital transformation is changing the way companies think and design their manufacturing environment. Both due to the increasing number of connections between IoT-Devices, tooling machines, and production lines and the phenomenon of the convergence of IT and OT, systems are becoming more complex than years ago. Organizational and cultural changes within manufacturing companies strengthen this trend and form Industry 4.0 environments and cyber-physical production systems (CPPS). As these systems do not longer stay alone but are connected to each other and the company’s outside, the size of the potential attack surface is increasing as well. Besides that, manufacturing companies, small and medium-sized in particular, are facing complex challenges based on lack of knowledge, budget, and time to understand as well as to interpret their current situation and risk level and therefore to derive necessary counter-measures. Efficient as well as pragmatic tools and methods for these companies do not exist. This paper shows a research approach in which the company-specific set-up of Industry 4.0 environment and CPPS is characterized by its potential vulnerabilities. This enables companies to evaluate their risk potential before setting up this kind of environments and to undJo,erstand the potential consequences more precisely. By doing so, companies can derive and prioritize important counter-measures and so to strengthen their level of cyber-security efficiently. This will decrease the number of cyber-security attacks and increase the company’s competitiveness.
Subscription business models provide an important component for monetizing the potential of Industrie 4.0. Subscription business is based on a long-term and participative business relationship between customer and provider. However, only digitalization offers the necessary framework conditions to realize the characteristic recurring and performance-based billing, and to ensure the necessary transparency about the usage phase of products as well as continuous performance improvements in the customer process. Against this background, companies must not only recognize the much-cited potential that lies in the total dedication to the success of individual subscription customers. Rather, the central obstacles must be addressed, examined, and subsequently overcome in a targeted manner in order to successfully establish subscription business models and place them on the market.
Feasibility Analysis of Entity Recognition as a Means to Create an Autonomous Technology Radar
(2021)
Mit den neuesten Technologietrends auf dem Laufenden zu bleiben, ist für Fertigungsunternehmen eine entscheidende Aufgabe, um auf einem global wettbewerbsfähigen Markt erfolgreich zu bleiben. Die Erstellung eines Technologieradars ist ein etablierter, jedoch meist manueller Prozess zur Visualisierung der neuesten Technologietrends.
Der Herausforderung, Technologien zu identifizieren und zu visualisieren, widmet sich das Projekt TechRad, das maschinelles Lernen einsetzt, um ein autonomes Technologie-Scouting-Radar zu realisieren. Eine der Kernfunktionen ist die Identifizierung von Technologien in Textdokumenten. Dies wird durch natürliche Sprachverarbeitung (NLP) realisiert.
Dieser Beitrag fasst die Herausforderungen und möglichen Lösungen für den Einsatz von Entity Recognition zur Identifikation relevanter Technologien in Textdokumenten zusammen. Die Autoren stellen eine frühe Phase der Implementierung des Entity Recognition Modells vor. Dies beinhaltet die Auswahl von Transfer Learning als geeignete Methode, die Erstellung eines Datensatzes, der aus verschiedenen Datenquellen besteht, sowie den angewandten Modell-Trainings-Prozess. Abschließend wird die Leistungsfähigkeit der gewählten Methode in einer Reihe von Tests überprüft und bewertet.
Prinzipien zur erfolgreichen Umsetzung von KI-Geschäftsmodellinnovationen
In Zeiten des zunehmenden globalen Wettbewerbs und hoch vernetzter Wertschöpfungsketten entwickelt sich Künstliche Intelligenz zu einem immer wichtiger werdenden Wettbewerbsfaktor für Unternehmen am Wirtschaftsstandort Deutschland. Durch den Einsatz von KI-Verfahren können nicht nur interne Geschäftsprozesse kostensenkend optimiert, sondern auch neue, digitale Geschäftsfelder und -modelle erschlossen werden. Es lassen sich zum einen Trends identifizieren, denen der Einsatz von KI in deutschen Unternehmen folgt. Zum anderen zeigt sich, dass sich KI unterschiedlich stark auf verschiedene Dimensionen innovativer Geschäftsmodelle auswirkt. Insgesamt lassen sich so Prinzipien ableiten, die die erfolgreiche Umsetzung von KI-Geschäftsmodellinnovationen beschreiben.
Neue Technologie- und Anwendungstrends kennzeichnen KI-Nutzung
Die tatsächliche KI-Landschaft in den Wertschöpfungsketten von KI-nutzenden Unternehmen ist durch Trends gekennzeichnet. Diese lassen sich in Technologie- und Anwendungstrends unterteilen. Experteninterviews zeigen beispielsweise, dass KI-Anwendungen bevorzugt auf Cloud-Infrastrukturen entwickelt und bereitgestellt werden. Das wiederum rückt die Frage nach der Wahrung der Datensouveränität in den Vordergrund. Anwendung findet KI tendenziell zur Prognose und Überwachung.
Sechs Prinzipien beeinflussen die erfolgreiche Umsetzung von KI-Geschäftsmodellinnovationen
Fallstudien über ein breites Spektrum der deutschen Wirtschaft beleuchten, welche Aspekte eines KI-basierten Geschäftsmodells den größten Effekt auf das Unternehmen haben. Hier lässt sich ein besonders hoher Einfluss von KI auf das Nutzenversprechen neuartiger, digitaler Leistungen der Unternehmen an die Kundinnen und Kunden feststellen. So lassen sich sechs Erfolgsprinzipien zur erfolgreichen Implementierung von KI-Technologien identifizieren, um die wirtschaftliche Nutzung von KI für Unternehmen in Deutschland im globalen Wettbewerb weiter zu steigern. So empfiehlt es sich zum Beispiel – neben der Auswahl des richtigen KI-Anwendungsfalles – ebenfalls darauf zu achten, dass die KI-Anwendung sowohl den Anbietenden wie auch den Anwendenden nützt. Diese und weitere Erfolgsprinzipien werden detailliert in der Studie Künstliche Intelligenz – Geschäftsmodellinnovationen und Entwicklungstrends beschrieben.
In the age of digitalization, manufacturing companies are under increased pressure to change due to product complexity, growing customer requirements and digital business models. The increasing digitization of processes and products is opening up numerous opportunities for mechanical engineering companies to exploit the resulting potential for value creation. Subscription business is a new form of business model in the mechanical engineering industry, which aims to continuously increase customer benefit to align the interests of both companies and customers. Characterized by a permanent data exchange, databased learning about customer behavior, and the transfer into continuous innovations to increase customer value, subscription business helps to make Industry 4.0 profitable. The fact that machines and plants are connected to the internet and exchange large amounts of data results in critical information security risks. In addition, the loss of knowledge and control, data misuse and espionage, as well as the manipulation of transaction or production data in the context of subscription transactions are particularly high risks. Complementary to direct and obvious consequences such as loss of production, the attacks are increasingly shifting to non-transparent and creeping impairments of production or product quality, which are only apparent at a late stage, or the influencing of payment flows. A transparent presentation of possible risks and their scope, as well as their interrelationships, does not exist. This paper shows a research approach in which the structure of subscription models and their different manifestations based on their risks and vulnerabilities are characterized. This allows suitable cyber security measures to be taken at an early stage. From this basis, companies can secure existing or planned subscription business models and thus strengthen the trust of business partners and customers.
Ongoing digitalization and Industry 4.0 enable the development of new business models due to the increase in available data and digital connected products. A promising business model type for the machinery and plant engineering industry are subscription models, consisting of products and services offered in return for continuous payments. However, subscription-based business models are associated with extensive changes in the traditional machinery and plant engineering industry, in particular, for small and medium-sized companies (SMEs). Established concepts for the development of value propositions and business models neglect important aspects, such as the integrated development and optimization of products and services across the entire life cycle or the data infrastructure. This paper presents a concept for a methodology to support SMEs developing value propositions within subscription models. Therefore, the systematic identification of customer benefits, the determination and prioritization of subscription relevant functionalities as well as the design of product and service elements addressing those functionalities are the main aspects on which the focus is placed on. The result is a subscription value proposition canvas for SMEs to address the impact of subscription models on products and services.
Methods of machine learning (ML) are difficult for manufacturing companies to employ productively. Data science is not their core skill, and acquiring talent is expensive. Automated machine learning (Auto-ML) aims to alleviate this, democratizing machine learning by introducing elements such as low-code or no-code functionalities into its model creation process. Due to the dynamic vendor market of Auto-ML, it is difficult for manufacturing companies to successfully implement this technology. Different solutions as well as constantly changing requirements and functional scopes make a correct software selection difficult. This paper aims to alleviate said challenge by providing a longlist of requirements that companies should pay attention to when selecting a solution for their use case. The paper is part of a larger research effort, in which a structured selection process for Auto-ML solutions in manufacturing companies is designed. The longlist itself is the result of six case studies of different manufacturing companies, following the method of case study research by Eisenhardt. A total of 75 distinct requirements were identified, spanning the entire machine learning and modeling pipeline.
Supply Chain Management liefert eine Fülle von Ideen und Methoden zur Gestaltung der Lieferkette. Dabei kann jedes Konzept zu erheblichen Kosteneinsparungen und verbessertem Lieferservice führen. Allerdings ist das einzelne Konzept nicht für unterschiedliche Kunden und deren diversifizierte Anforderungen praktikabel. Daher kann eine einheitliche "one size fits all"-Supply Chain nicht zum Erfolg führen. Der Schlüssel liegt in der Segmentierung der Supply Chain.
Manufacturing companies (MFRs) are increasingly extending their
portfolios with services and data-driven services (DDS) to differentiate themselves from competitors, tap new revenue potential, and gain competitive advantages through digitization and the subsequently generated data. Nonetheless, DDS fail more often than traditional industrial services and products within the first year on the market. Particularly, companies are failing to sell DDS successfully and efficiently with their existing (multi-level) distribution structures. Surprisingly, there is a lack of scientific research addressing this issue. Since there are currently no holistic models for an end-to-end description of distribution-tasks for DDS in the manufacturing industry, this paper contributes to a task-oriented reference model for mapping interactions in the multi-level distribution management. Therefore, a case study research approach is used, to identify and describe the interactions in the multi-level distribution management of DDS, as well as to develop a regulatory framework for MFRs and their multi-level distribution management. This research uses the established theoretical framework of Service-Dominant-Logic to address the co-creation in multi-level distribution management of DDS. As a result, this paper identifies different interaction variants as well as the need for a new management function with 4 main and 14 basic tasks.
Ziel des Forschungsvorhabens war die Erhöhung der Effizienz und Effektivität von Suchanfragen in ERP-Systemen. Dabei sollte der Aufwand für den Nutzer reduziert und die Qualität der Ergebnisse verbessert werden. Die Erreichung der Ziele wurde durch die Entwicklung einer selbstlernenden, kontextbasierten Suchmaschine für ERP-Systeme realisiert. Mit der Berücksichtigung des Kontexts einer Suchanfrage, des Benutzerverhaltens und einer Ergebnisbewertung durch den Anwender wurde die Ergebnisqualität von Suchanfragen kontinuierlich gesteigert. Durch die Entwicklung eines Demonstrators wurde der Nutzen des Konzepts nachgewiesen, indem dieser in verschiedenen Szenarien erprobt und anhand einer Wirtschaftlichkeitsbetrachtung bewertet wurde.
Geschäftsmodell-Innovation
(2017)
Der Wirtschaftsstandort Deutschland ist bislang vorrangig auf die Produktion von Gütern ausgerichtet: Kraftwagen und Kraftwagenteile, Maschinen, Datenverarbeitungsgeräte sowie elektronische und optische Erzeugnisse stellten wertmäßig die Hälfte der Gesamtausfuhren des Jahres 2013 dar. Die fortschreitende Globalisierung führt zu einer verstärkten internationalen Wettbewerbsintensität bei sich schneller ändernden Produkten und einem wachsendem Differenzierungsdruck. Industrielle Dienstleistungen stellen vor diesem Hintergrund eine Möglichkeit dar, die technische Leistungsfähigkeit von Produkten zu erweitern und zeitgleich die Abgrenzung und Differenzierung von Wettbewerbern auf internationalen Märkten zu realisieren. Produkte werden durch industrielle Dienstleistungen zu umfassenden und spezifischen Lösungen erweitert, die über die Kerneigenschaften der Produkte hinausgehen und Probleme der Nutzer und Kunden als integriertes System lösen. Sach- und Dienstleistungen werden nach Belz als Leistungssysteme beschrieben, die ausgewählte Kundenprobleme nicht als einzelnes Produkt oder einzelne Dienstleistung, sondern umfassend und wirtschaftlich als Kombination aus Leistungsbestandteilen lösen.
Die verarbeitende Industrie in Deutschland steht vor der Transformation von der bisher vorherrschenden ökonomisch orientierten Produktion hin zu einer nachhaltigen Produktion. Durch die Anpassung von Parametern der Produktionsplanung und -steuerung, wie z. B. der Losgröße durch u. a. die Konsolidierung von Transportaufwänden oder geringe Reinigungsaufwände, kann dabei eine nachhaltigere Produktion erreicht werden. Hierfür wurde mittels einer systematischen Methodik ein digitaler Schatten konzeptioniert, der eine nachhaltige Konfiguration von Losgrößen ermöglicht. Dafür erfolgen eine Aggregation von Daten aus verschiedenen Informationssystemen und die Simulation des Verhaltens eines Produktionssystems bei veränderten Losgrößen. Diese ermöglichen eine optimierte Auslegung der Losgröße, basierend auf ökonomischen und ökologischen Zielgrößen.
Generation of a Data Model For Quotation Costing Of Make To Order Manufacturers From Case Studies
(2022)
For contract or make to order manufacturers, quotation costing is a complex process that is mainly performed based on experience. Due to the high diversity of the product range of these mostly small or medium-sized companies (SMEs) and the poor data situation at the time of quotation preparation, the quality of the calculation is subject to strong variations and uncertainties. The gap between the initial quotation costing and the actual costs to be spent (pre- and post-calculation) is crucial to the existence of SMEs. Digitalization in general can help companies to get a better understanding of processes and to generate data. For improving these processes, an understanding of the important data for that specific process is crucial. Accurate quotation costing for customized products is time-consuming and resource-intensive, as there is a lack of an overview of data to be used within the process. This paper therefore derives a data model for supporting quotation costing in the company, based on literature-based costing procedures and recorded case studies for quotation and calculation. Based on the results, SMEs will have a first overview of the needed data for quotation costing to optimize their calculation process.
Künstliche Intelligenz (KI) hat als Technologie in den vergangenen Jahren Marktreife erlangt. Es existiert eine Vielzahl benutzerfreundlicher Produkte und Services, welche die Anwendung von KI im Alltag und im Unternehmen vereinfachen. Die Herausforderung, vor denen Anwendende, gerade im betriebswirtschaftlichen Kontext, stehen, ist nicht die technische Machbarkeit einer KI-Applikation, sondern deren organisatorisch und rechtlich zulässige Gestaltung. Zu einer zunehmenden Dynamik in der Gesetzgebung kommt ein gesellschaftliches Interesse an der Kontrolle und Transparenz über die für KI-Modelle erhobenen Daten. Die Diskussion über Datensouveränität im geschäftlichen und privaten Alltag rückt mehr und mehr in das Zentrum der öffentlichen Aufmerksamkeit.
Datenbasierte KI-Anwendungen stehen damit in einem Spannungsfeld zwischen den Potenzialen, die das Erheben und Teilen von Daten über Unternehmensgrenzen hinweg bietet, und der Herausforderung, die Datensouveränität der involvierten Personen zu wahren. Die vorliegende Studie soll erstens über die Auswirkungen der Datensouveränität und die damit verbundenen aktuellen und kommenden Regularien auf KI-Anwendungsfälle aufklären. Dafür wurden Expertinnen und Experten aus den Bereichen Recht, KI- und Organisationsforschung befragt. Zweitens zeigt die Studie Potenziale und Best Practices von KI-Anwendungsfällen mit überbetrieblichem Datenaustausch auf. Dafür wurden Fallstudien in Unternehmen durchgeführt, die bereits erfolgreich Datenaustausch in ihre Geschäftsmodelle integriert haben, um ihre KI-Applikationen zu betreiben und zu verbessern.
Nowadays, the market for information and communication technologies used for IOT-applications grows daily. Since companies need technologies to transform their business processes corresponding to the digital revolution, they need to know which technologies are available, and fit the best for their use case. Their inertial issue is the lacking overview of technologies suitable to connect their production or logistics. Hence, this paper presents a methodology to select technologies (and combinations) based on their functions. It differentiates between information and communication technologies, digital technologies and connecting technologies by the physical function and its role in a cyber-physical system. Depending on the use case, the applicability of every technology varies. Due to that reason, the paper illustrates a ranked qualification of the technologies for typical use cases, focussing tracking and tracing issues in the intralogistics of producing companies. The evaluation is performed upon a literature research, a market study to identify suitable technologies, and various expert interviews to assess the applicability of the technologies.
Discrete Event Simulation (DES) is a well-known approach to simulate production environments. However it was rarely used for operative planning processes and to our knowledge never in terms of multiple disposition levels.In this paper we develop the necessary adjustments to use DES for this purpose and show some theoretical advantages.
Eine Transformation findet einen Abschluss, nachdem der gewünschte Zielzustand erreicht wurde. Wie sieht es bei der digitalen Transformation aus? Kann es im Hinblick auf technologische Entwicklungen jemals zu einem Ende kommen? Oder befindet sich ein Unternehmen hierbei in einer kontinuierlichen Transformation durch die Weiterentwicklung der Digitalisierung? Wenn ja, wie kann ein Unternehmen mit diesem ständigen Wandel effizient und sicher umgehen? (Quelle: https://link.springer.com/chapter/10.1007/978-3-662-63758-6_17 )
More and more manufacturing companies are starting to transform the transaction-based business model into a customer value-based subscription business to monetize the potential of digitization in times of saturated markets. However, historically evolved, linear acquisition processes, focusing the transactionoriented product sales, prevent this development substantially. Elemental features of the subscription business such as recurring payments, short-term release cycles, data-driven learning, and a focus on customer success are not considered in this approach. Since existing transactional-driven acquisition approaches are not successfully applicable to the subscription business, a systematic approach to an acquisition cycle of the subscription business in the manufacturing industry is presented, aiming at a long-term participative business. Applying a grounded theory approach, a task-oriented model for themanufacturing industry was developed.
The model consisting of five main tasks and 14 basis tasks serves as best practice to support manufacturing companies in adapting or redesigning acquisition activities for their subscription business models.
Inhaltsangabe Band:
Die vernetzte Digitalisierung hat die produzierende Industrie fundamental verändert. Im Rahmen dessen eröffnen sich produzierenden Unternehmen kontinuierlich neue Chancen, in einem zunehmend dynamischen und durch das Internet geprägten Wettbewerb, wirtschaftliche Erfolge zu erzielen. Durch die veränderten Rahmenbedingungen der vernetzten Digitalisierung müssen produzierende Unternehmen jedoch neue Ansätze für die Organisation der digitalen Transformation verfolgen: Sie müssen die neue Führungsaufgabe Digitalisierungsmanagement gestalten. Dabei muss das Digitalisierungsmanagement eine breite Aufgabenvielfalt abdecken.
Dieses Buch befähigt produzierende Unternehmen die digitale Transformation erfolgreich zu gestalten. Dazu werden Nutzen und Funktionsweisen der wesentlichen Aufgaben des Digitalisierungs- und Informationsmanagements praxisnah dargestellt. Ein spezifisch für produzierende Unternehmen, die eine digitale Transformation anvisieren, entwickeltes Digitalisierungs- und Informationsmanagement-Modell verknüpft schließlich die Inhalte.
Das vorliegende Buch ist als ein Nachschlagewerk für Führungskräfte und Entscheider entwickelt worden, die die Herausforderungen der Realisierung von digitalen Geschäftsmodellen, digitalisierten Produkten und digitalen Geschäftsprozessen angehen wollen. Die Methoden in diesem Buch helfen dabei, die richtigen Managementaufgaben zu verfolgen und diese in der Unternehmensorganisation umzusetzen. Dabei werden auch die Schnittstellen zwischen dem strategischen Digitalisierungsmanagement und dem taktischen bis operativen Informationsmanagement behandelt. Das Buch bietet einen schnellen und einfachen Zugriff auf die wichtigsten Methoden und viele unterstützende Beispiele. Es ist Teil der Reihe „Handbuch Produktion und Management“ und ergänzt dessen Ordnungsrahmen.
(Quelle: https://link.springer.com/book/10.1007/978-3-662-63758-6)
Methods of machine learning (ML) are notoriously difficult for enterprises to employ productively. Data science is not a core skill of most companies, and acquiring external talent is expensive. Automated machine learning (Auto-ML) aims to alleviate this, democratising machine learning by introducing elements such as low-code / no-code functionalities into its model creation process. Multiple applications are possible for Auto-ML, such as Natural Language Processing (NLP), predictive modelling and optimization. However, employing Auto-ML still proves difficult for companies due to the dynamic vendor market: The solutions vary in scope and functionality while providers do little to delineate their offerings from related solutions like industrial IoT-Platforms. Additionally, the current research on Auto-ML focuses on mathematical optimization of the underlying algorithms, with diminishing returns for end users. The aim of this paper is to provide an overview over available, user-friendly ML technology through a descriptive model of the functions of current Auto-ML solutions. The model was created based on case studies of available solutions and an analysis of relevant literature. This method yielded a comprehensive function tree for Auto-ML solutions along with a methodology to update the descriptive model in case the dynamic provider market changes. Thus, the paper catalyses the use of ML in companies by providing companies and stakeholders with a framework to assess the functional scope of Auto-ML solutions.
In order to cope with the challenges of an increased demand for flexibility, quality and availability of production, maintenance measures provide a major competiveness factor for manufacturing companies. Yet, interdependencies between maintenance and production activities as well as differing target systems within the functional units of an enterprise, especially production and maintenance, raise needs for extended coordination efforts. This paper aims to develop an innovative approach for the coordination between maintenance and production activities for industrial production companies. To achieve this, the novel coordination mechanism is used. It helps to achieve maximised operational availability— for a maximised output of the production system at optimal costs. Based on the developed model, the present paper identifies findings regarding the impact of different maintenance strategies on the medium-term economic efficiency of the production system.
Assessment of IS Integration Efforts to Implement the Internet of Production Reference Architecture
(2018)
As part of a collaborative network, manufacturing companies are required to be agile and accelerate their decision making. To do so, a high amount of data is available and needs to be utilized. To enable this from a company internal information system perspective, the Internet of Production (IoP) describes a future information system (IS) architecture. Core element of the IoP is a digital platform building the basis for a network of cognitive systems. To implement and continuously further develop the IoP, manufacturing companies need to make architecture-related decisions concerning the accessibility of data, the processing of the data as well as the visualization of the information. The goal of this research is the development of a decision-support methodology to make those decisions, taking under consideration the evaluated IS integration effort. Therefore, this paper describes the allocation of IS functions and identifies the effort drivers for the respective IS integration by analyzing the integration possibilities. Conclusively this approach will be validated in a case study.
In order to achieve a holistic cost management approach, the maintenance and service costs should already be assessed during the development of machines and equipment. The required information in the company, like PLM, process and test data, are commonly not available or vague, especially in early development phases. This paper introduces a feasible method for an early assessment of maintenance and service costs during product development. In doing so, appropriate cost assessment methods are selected, based on the availability and quality of the existing information in the individual development phases. The evaluations of these methods are aggregated in a software tool, so that the respective cost information is displayed with a maximum, minimum and most probable value. The developed software tool was validated in cooperation with a new electric vehicle manufacturer.
Management of information and the IT systems it is stored in becomes a crucial capability for the industry. However, companies are struggling with the management of the various requirements and frequent changes of technology. Thus, IT complexity has become a major challenge for companies. At the same time, especially manufacturing companies are striving to implement Industrie 4.0 concepts. Many of these even have developed an Industrie 4.0 roadmap including various projects to change the company. Companies can develop such roadmaps by applying the Industrie 4.0 Maturity Index that gives a broad view on necessary capabilities for Industrie 4.0.
In our research, we analyzed data sets from over 10 manufacturing companies that have performed an Industrie 4.0 maturity assessment. Our hypothesis was that IT complexity challenges are hindering the implementation of Industrie 4.0 roadmaps significantly. We could prove this hypothesis at least for the companies analyzed and give insights on the specific challenges. Based on our analysis, we conclude our article by giving concrete recommendations on how to tackle IT complexity.
Pricing is one of the most important, but underestimated tools, to enhance a company's profitability. Especially in the furniture sector, customers place a special interest in cost-efficient products and easy processes. Individualised and sustainable furniture can help to create a unique selling point and deliver real value to the customers. Therefore, a platform to create designs together is needed and can involve several stakeholders in the design and production phase. However, in order to include several stakeholders, the pricing and revenue model need to reflect individual needs and be a benefit to all. In this paper, the initial situation and potential revenue model options will be presented. Furthermore, multiple scenarios for practical use will be discovered and an overview given.
Digital technologies have gained significant importance in the course of the 4th Industrial Revolution and these technologies are widely implemented, nowadays. However, it is necessary to bear in mind that an ill-considered use can quickly have a negative impact on the environment in which the technology is used. For more responsible and sustainable use, the regulation of digital technologies is therefore necessary today. Since the government is taking a very slow response, as the example of the AI Act shows, companies need to take action themselves today. In this context, one of the central questions for companies is: "Which digital technologies are relevant for manufacturing companies in terms of regulation? This paper conducted a quantitative Delphi study to answer this question. The results of the Delphi study are presented and evaluated within the framework of a data analysis. In addition, it will be discussed how to proceed with the results so that manufacturing companies can benefit from them. Furthermore, the paper contributes to the development of an AI platform in the German research project PAIRS by investigating the compliance relevance of artificial intelligence applications.
Industry 4.0 is driven by Cyber-Physical Systems and Smart Products. Smart Products provide a value to both its users and its manufacturers in terms of a closer connection to the customer and his data as well as the provided smart services. However, many companies, especially SMEs, struggle with the transformation of their existing product portfolio into smart products. In order to facilitate this process, this paper presents a set of smart product use-cases from a manufacturer’s perspective. These use-cases can guide the definition of a smart product and be used during its architecture development and realization. Initially the paper gives an introduction in the field of smart products. After that the research results, based on case-study research, are presented. This includes the methodological approach, the case-study data collection and analysis. Finally, a set of use-cases, their definitions and components are presented and highlighted from the perspective of a smart product manufacturer.
Manufacturing companies are constantly increasing their efforts in the subscription business, also known as product-as-a-service business, offering usage and outcome based solutions (value-in-use) instead of transactional services and products (value-in-exchange). Customers are becoming contractual subscribers of the solution in return for recurring, performance-related payments. To address arising, inevitable challenges like (1) reducing customer churn, (2) increasing usage intensity and outcome quality, (3) ensuring the adoption of product and software releases as well as (4) fostering customer loyalty, leading manufacturing companies are setting up a new organizational, customer-facing unit, called Customer Success Management (CSM). This unit has its origins in the software-as-a-service business, operating next to established entities like sales, key account management and customer service. Since there are currently no holistic models for an end-to-end description of CSM-tasks in the manufacturing industry, this paper contributes to a taskoriented reference model, using a grounded theory approach, examining both manufacturing and software companies. Containing a reference framework with 8 main tasks, 17 basic tasks and 76 elementary tasks, the reference model supports manufacturing companies in adapting and customizing a company-specific CSM concept.
Pricing for Smart-Product-Service-Systems in Subscription Business Models for Production Industries
(2021)
In the production industry, subscription business models have the potential to create long-term relationships where a supplier provides a continuous value-oriented service to a customer based on digitalisation. Monetising this increase in value through pricing represents a central challenge for suppliers in subscription business. Unlike the current dominant transactional business, the focus of pricing is on the value-in-use of the customer (e.g. on the increase in output for the customer). In this regard, there is so far no pricing approach for practice that allows the linking of the performance data of the customer with the periodically charged price. However, in subscription businesses, such an approach is required to create win-win situations for the customer and supplier through continuous performance improvement. Therefore, this paper develops a novel process model for pricing of smart-product-service-systems in subscription business for production industries. This process can serve as basis for suppliers of subscriptions in the production industry to align pricing with the created value-in-use. In the long term, this allows companies to systematically develop their pricing to monetise the potential of digitalisation.
The Impact Of Manufacturing Execution Systems On The Digital Transformation Of Production Systems
(2021)
With the focus of manufacturing companies on the digital transformation, Manufacturing Execution Systems are market-ready, modular software solutions for manufacturing companies to integrate the value-adding and supporting processes horizontal and vertical in the company. Companies, especially small and mediumsized companies, face high internal and external costs for the implementation of the MES modules. An advantage of MES is the possibility to implement the systems in a continually, module-by-module approach, with the benefit of timely distributed investments. By realizing fast improvements, companies can use the benefits for further module implementations. This paper proposes a maturity model to measure the impact of an MES on the digital transformation of the company’s production systems. The model fulfils two purposes. The first, companies can measure the impact based on the difference between its current maturity index and the potential index of an implemented MES. The second is, the user can identify what impact an MES has in general on the digital transformation since the developed maturity model is derived from an established industry 4.0 maturity model. The development of the maturity model is based on the methodologies of AKKASOGLU and focuses on the further development of an established model. As an outlook, the application of the model will be described briefly. The proposed maturity model can directly be used by practitioners and offers implications for further development of MES functionalities.
Industrial practice shows a strong trend towards digitalization. It is not only economic crises, such as those triggered by Covid-19, that are reinforcing this trend. It is also the entrepreneurial urge to fulfill customer wishes in the best possible way and to adapt to new requirements as quickly as possible. Due to the advancing digitalization, the role of business application systems in manufacturing companies is therefore becoming increasingly important. The data processed in IT-Systems represent a great potential, especially for the evaluation of change requests in production. Through efficient change management, companies can record and process changes quickly. However, the necessary data basis to decide on existing change requests is still hardly used. Existing IT-Systems for change management coordinate the processing of change requests, but do not relate to data of operational application systems such as Enterprise-Resource-Planning. Therefore, a conceptual approach is required for the evaluation of change requests. This approach is based on an objective recording system that enables the transformation from the change description to an evaluation space. The paper presents an approach for the systematic transfer of requirement characteristics into the world of operational IT-Systems.
The almost boundless possibilities of realizing saving potentials and innovations drive manufacturing companies to implement Business Analytics as part of the digitalization roadmap. The increasing research within the field of algorithm design and the wide range of user-friendly tools simplify generating first insights from data also for non-professionals. However, small and medium sized companies struggle implementing Business Analytics company-wide due to the lack of competencies. Especially the customization of a multitude of analytic methods in order to match a superordinate, business-relevant question is not done easily. This paper enables researchers as well as practitioners to close the gap between business relevant questions and algorithms. From a practical point of view, this paper helps shortening the search time for a suitable algorithm. Out of a research perspective, it aims to help positioning new algorithms within a structured framework in order to enhance the communication of algorithms’ capabilities.
The successful use of Business Analytics is increasingly becoming a differentiating competitive factor. The ability to extract data-driven insights and integrate them into decision-making is becoming growingly important. The underlying technologies are evolving exponentially, the value proposition differs from simple descriptive applications to automated decision-making. Existing approaches found in literature and practice to classify those levels only insufficiently mark down the boundaries between the different technology levels. As a consequence, it is often unclear which characteristics of the technology interact with the working environment, which can be described as a socio-technical system. Using a systematic literature review, this paper identifies the characteristics of Business Analytics and delineates three types of Business Analytics based on case studies. Thus, a starting point for the socio-technical system design and optimization for the use of Business Analytics is created.
Mit der steigenden Bedeutung von industriellen Dienstleistungen und den damit verbundenen Herausforderungen der Unternehmensführung bedarf es eines Bezugsrahmens für das Management industrieller Dienstleistungen. Ein solcher Ansatz, der eine umfassende Beschreibung der Aufgaben des Managements darlegt, wurde von Schuh und Gudergan entwickelt.
Ziel des Ordnungsrahmens ist es, dem Management eine grundlegende Orientierung zu geben und dabei die relevanten Gestaltungsbereiche zu betrachten. Es wird in Anlehnung an das St. Galler Management-Modell zwischen einer internen und einer externen Perspektive unterschieden.
Der im weiteren Verlauf vorgestellte Ordnungsrahmen beschreibt den Betrachtungsbereich sowie Inhalte und Aufgaben, die für das Management Industrieller Dienstleistungen von Relevanz ist. Gleichzeitig ermöglicht der vorgestellte Ordnungsrahmen die Strukturierung und Einordnung der verschiedenen Themenfelder. Der Ordnungsrahmen gliedert dabei das Management industrieller Dienstleistungen in die Teilbereiche Unternehmensstruktur, Unternehmensprozesse und Unternehmensentwicklung. Diese innerbetrieblichen Aspekte werden in den Kontext der für das Unternehmen relevanten Umweltsphären und Anspruchsgruppen gesetzt.
Die Frage nach der strategischen Einbindung des Dienstleistungsgeschäfts in den Kontext des Gesamtunternehmens wird angesichts globalisierter Märkte mit hohem Wettbewerbsdruck zunehmend wichtiger. Die Wahl des richtigen Umfangs des Dienstleistungsangebots unter Berücksichtigung der Gesamtunternehmensstrategie ist erfolgsentscheidend für die richtige Positionierung eines Industrieunternehmens im Markt.
Daher wird in diesem Beitrag der Begriff "Strategisches Management industrieller Dienstleistungen" anwendungsnah beschrieben. Hierauf aufbauend wird ein Prozess zum strategischen Management industrieller Dienstleistungen vorgestellt, der Dienstleistungs- und Gesamtunternehmensstrategie integriert betrachtet. Zur operativen Umsetzung der Inhalte der einzelnen Prozessphasen werden abschließend ausgewählte Methoden und Werkzeuge vorgestellt.
Die Umsetzung einer strategischen Veränderung hin zum Lösungsanbieter besteht in weiten Teilen in der Anpassung des bestehenden Geschäftsmodells oder der Neudefinition desselben. Zunehmend werden bspw. anstelle des Verkaufs von Sachgütern und des darauffolgenden Angebots von After-Sales-Dienstleistungen Garantien über die Funktionsbereitschaft oder Verfügbarkeit angeboten. Dazu ist umfassendes Wissen über Geschäftsmodelle und deren Anpassung notwendig.
In diesem Beitrag wird beschrieben, wie Geschäftsmodelle grundsätzlich aufgebaut sind und welche Fragestellungen bei der Entwicklung eines Geschäftsmodells beantwortet werden müssen. Es werden für das Management industrieller Dienstleistungen relevante nutzungs- und gebrauchsabhängige Geschäftsmodelle vorgestellt. Das Kapitel wird abgerundet durch eine Methode für das Management der Anpassung von Geschäftsmodellen.
Kundensysteme
(2016)
Eine Vielzahl von Unternehmen konzentriert sich in den letzten Jahren gezielt auf die Bedürfnisse der Kunden. Interessen und Wünsche der Kunden fließen mehr und mehr in die Prozesse der Unternehmen ein und es erfolgt eine Verschiebung der Verhandlungsmacht hin zum Kunden. Unternehmen müssen sich der neuen Macht des Kunden stellen, wozu es einer wohlüberlegten und strukturierten Kundenbearbeitung bedarf.
Neben Fragestellungen der Kundenakquise zählen sowohl die Kundenbindung als auch die Markenführung zu den entscheidenden Aspekten, die man in der Wissenschaft unter dem Verständnis eines Kundensystems untersucht. In diesem Beitrag werden diese drei Hauptprozesse näher beschrieben. Diese führen in Verbindung mit dem ebenfalls vorgestellten Key-Account-Management und Customer-Relationship-Management zu wiederholten Kaufentscheidungen und Vertragsabschlüssen.
Kennzahlen und Führungssysteme sind im Sinne des Performance-Managements ein zentraler Aspekt des Managements industrieller Dienstleistungen. Die Performancemessung bezieht dabei sowohl strategische Aspekte als auch Ergebnisse auf der operativen Ebene mit ein.
Die Immaterialität sowie die Integrativität von Dienstleistungen bedingen auch, dass mehr perspektivische Kennzahlen und Führungssysteme erforderlich sind, die neben monetären Kennzahlen auch die Erfassung und Auswertung von für Dienstleistungen spezifischen kunden- sowie kundenprozessbezogenen Kennzahlen ermöglichen. Im Beitrag werden ausgewählte Messansätze vorgestellt. Hierfür wird eine Gliederung in die Teilbereiche Kundengerichtete, Unternehmensgerichtete und Intern gerichtete Messansätze vorgenommen.
Im Zuge der fortschreitenden Angebotserweiterung um industrielle Dienstleistungen und immer komplexere Leistungssysteme sehen sich Industriegüterunternehmen vor der Herausforderung, ihre Organisationsstrukturen um- oder sogar neu zu gestalten. Neben der Auflösung der stark produktorientierten und häufig hierarchischen Organisationsstrukturen ist die Einführung von Center-Konzepten oder sogar unabhängigen Dienstleistungsbereichen zu einem Erfolgsgaranten für das Dienstleistungsgeschäft geworden.
In diesem Beitrag werden, aufbauend auf den generischen Formen der Unternehmensorganisation, verschiedene Möglichkeiten zur Einbindung der Dienstleistungseinheiten in das Unternehmen vorgestellt und vor dem Hintergrund der verschiedenen Entwicklungsstufen des Dienstleistungsgeschäfts diskutiert. Im Anschluss werden die verrichtungsorientierte und objektorientierte Gliederung für die Ausgestaltung der Dienstleistungseinheiten vorgestellt. Abschließend werden die verschiedenen Auftragsformen und der Umfang des Leistungsangebots als Einflussfaktoren der Organisationsstrukturierung diskutiert.
IT-Systeme helfen Unternehmen dabei, ihre industriellen Dienstleistungen effizienter zu gestalten und weiterzuentwickeln sowie die Effizienz der Dienstleistungsprozesse zu steigern. Typische IT-Systeme, die im Bereich der industriellen Dienstleistungen eingesetzt werden, sind Servicemanagementsysteme (SMS) und Customer-Relationship-Management-Systeme (CRM-Systeme). SMS unterstützen den Anwender bei der Datenverwaltung und der Erfassung seiner Kern- und Querschnittsfunktionen.
Da auf dem Markt eine Vielzahl von Service-IT-Systemen existiert, die unterschiedliche Herausforderungen adressieren, bestehen Schwierigkeiten für den Anwender, diese miteinander zu vergleichen. Anhand eines Referenzmodells werden die möglichen Funktionen von SMS beschrieben und es wird ein Ansatz geliefert, diese zu beurteilen. Das vorgestellte Referenzmodell beschreibt den Funktionsumfang von SMS für den Service im Maschinen- und Anlagenbau. Die Kundenbindung nimmt im Management industrieller Dienstleistungen einen hohen Stellenwert ein, da sie sich direkt auf den Erfolg eines Unternehmens auswirkt. Aufgrund der zunehmenden Globalisierung und der steigenden Transparenz der Märkte lässt sich eine abnehmende Kundenloyalität beobachten. Als Folge dessen lässt sich in Unternehmen ein Wandel von einer Prozessorientierung hin zur Kundenorientierung feststellen.
Das Konzept der CRM-Systeme soll Unternehmen in die Lage versetzen, die Kundenbindung zu erhöhen und somit der Herausforderung der abnehmenden Kundenloyalität entgegenzuwirken. Dazu werden die grundlegenden Prinzipien und Funktionalitäten von CRM-Systemen erläutert. Der Beitrag schließt ab mit der Darstellung einer Vorgehensweise zur Auswahl von IT-Systemen.
Im Rahmen des Wandels vom Produzenten zum produzierenden Dienstleister spielt eine am Kunden ausgerichtete Dienstleistungskultur im Unternehmen eine entscheidende Rolle. Vor diesem Hintergrund wird dargestellt, wie Unternehmen eine Dienstleistungskultur erfolgreich gestalten können. Dafür werden in einem ersten Schritt die Grundzüge einer Unternehmenskultur kurz erläutert.
Darauf aufbauend erfolgen eine anwendungsnahe Beschreibung der konstituierenden Merkmale einer Dienstleistungskultur sowie eine Darstellung der Gestaltungsfelder und Aufgaben, die von ihr im Unternehmen übernommen werden. Abschließend werden Instrumente und Vorgehensweisungen vorgestellt, die eine Gestaltung einer Dienstleistungskultur ermöglichen.
Im Kontext Industrie 4.0 kommt der Erfassung der anfallenden Daten in der Produktion und deren Nutzung eine zentrale Bedeutung zu. Analysen betrieblicher Daten, welche auf verschiedenen Ebenen generiert werden, lassen Rückschlüsse und Erkenntnisse zur besseren Entscheidungsfindung zu. Die Basis für den Einsatz von Verfahren der Datenanalyse und -auswertung stellt ein hinreichend genaues Abbild der relevanten Daten - der Digitale Schatten - in der Auftragsabwicklung, Produktion, Entwicklung oder angrenzenden Bereichen dar.
Im Rahmen des vorliegenden Beitrages wird ein Modell für den Digitalen Schatten in der Auftragsabwicklung vorgestellt, welches die Basis für die Implementierung von Methoden der Datenanalytik darstellt.
Heute begegnen wir den Herausforderungen einer VUCA-Welt mit Flexibilität und Veränderlichkeit in unseren Produktionssystemen. Seit 2012 gerät die Globalisierung ins Stocken. Das Investitionsvolumen zeigt einen Trend der De-Globalisierung. Ein Umdenken muss insbesondere in Deutschland herbeigeführt werden.
In this paper, we firstly present a target system which is deduced to assess the economic profitability of reverse supply chains. Considering this, we analyse process reference models to define relevant components of an appropriate target system.
Subsequently, we define applicable business models which are the basis for the manufacturer to offer new services to its customers on the one hand and to manage a goal-oriented return, recovery and resell of used products and components on the other hand. This will be done based on the morphology methodology in order to understand the characteristics and attributes of reverse supply chains.
Today, manufacturing companies are facing the influences of a dynamic environment and the continuously increasing planning complexity. Using advanced data analytics methods, processes can be improved by analyzing historical data, detecting patterns and deriving measures to counteract the issues. The basis of such approaches builds a virtual representation of a product – called the digital twin or digital shadow.
Although, applied IT systems provide reliable feedback data of the processes on the shop-floor, they lack on a data structure which represents real-time data series of a product. This paper presents an approach for a data structure for the order processing which overcomes the described issue and provides a virtual representation of a product. Based on the data structure deviations between the production schedule and the real situation on the shop-floor can be identified in real time and measures to reschedule operations can be identified.
Wichtige Wachstumsmärkte werden zunehmend durch Handelshemmnisse abgeschottet. Während die Automobilindustrie bereits mit dem Completely Knocked Down (CKD)-Konzept reagiert, indem Erzeugnisse teilzerlegt exportiert und lokal endmontiert werden, fehlen für den Maschinen- und Anlagenbau geeignete Ansätze für die Übertragung. Der vorliegende Artikel leistet dazu einen Beitrag, in dem die relevanten Merkmale einer CKD-Baugruppe definiert und vor dem Hintergrund relevanter Wirkungszusammenhänge ein Vorgehen für die Ableitung idealer Baugruppentypen skizziert wird.
One of the major challenges facing today´s manufacturing industry is to differentiate from competition in a highly globalized world. As a consequence to the increasing competitive pressure, many companies transform their product centered business models towards service based business models to differentiate from competition. However, the transformation is often underestimated regarding its complexity and its management challenges to behavioral change.
As a consequence lots of transformation initiatives fail. Besides difficulties in structuring the magnitude of changes in processes and structures, many transformation managers do not perceive the risk of employee resistance against changes, which is one of the key factors causing the failure of transformation. The objective of this paper is to enhance the existing body of research on manufacturer´s organizational transformation towards Product-Service Systems. More detailed, the objective is to develop new knowledge to support the management during the decision-making process in the way how and by means of which instruments the change of behavior can be supported when transforming from a manufacturer to a solution.
We developed a reference framework which structures and defines the relevant dimensions of behavioral change. The identification and validation of the success factors build the second component of our research. We conducted an empirical investigation in the German manufacturing industry and got 79 data sets.
Structural equation modelling was applied for the analyses and the validation of the hypotheses. By this analysis we linked management practice with employee behavior and transformational success variables. On the basis of the gained insights decisions can be made concerning the successful transformation from manufacturer to a solution-oriented service provider.
Im Rahmen der vernetzten Digitalisierung stehen insbesondere kleine und mittlere IT-Organisationen und IT-Dienstleister vor der großen Herausforderung, in einem immer dynamischer werdenden Umfeld Leistungen in hoher Qualität zu liefern. Die Verknüpfung dieser Leistungen mit den zu unterstützenden Geschäftsprozessen und Geschäftsmodellen gestaltet sich schwierig und erfordert eine service- und prozessorientierte Denkweise.
Zur Bewältigung dieser Herausforderungen und der Umsetzung des "service- und prozessorientierten Denkens" bietet das IT-Service-Management (ITSM) Methoden und Maßnahmen zur kundenorientierten, prozessgesteuerten und transparenten Erbringung von IT-Services. Trotz bestehender ITSM-spezifischer Referenzmodelle und Regelwerke werden die beschriebenen Methoden von kleinen und mittleren IT-Organisationen und IT-Dienstleistern kaum genutzt. Der Grund hierfür liegt unter anderem in der hohen Komplexität der Regelwerke und dem damit verbundenen großen Implementierungsaufwand. Es fehlt ein Vorgehen, das die Fähigkeiten und Möglichkeiten von kleinen und mittleren Unternehmen (KMU) berücksichtigt, um IT-Prozesse eigenständig hinsichtlich der Serviceorientierung zu bewerten und zu optimieren.
Das Ergebnis des Forschungsvorhabens "GradeIT" ist eine Vorgehensweise, die KMU dabei unterstützt, relevante IT-Service-Prozesse für sich selbst zu identifizieren, um diese dann eigenständig zu bewerten und auf Basis transparent dargestellter Wirkungszusammenhänge zu spezifischen Einflussfaktoren erfolgversprechende Handlungsempfehlungen auszusprechen.
Service Engineering
(2016)
Für die Neuentwicklung von industriellen Dienstleistungen hat sich die Disziplin Service Engineering etabliert. Service Engineering umfasst die systematische Entwicklung von Dienstleistungen mithilfe ingenieurwissenschaftlicher und betriebswirtschaftlicher Methoden.
Aufbauend auf einer generellen Einführung und Definition werden im folgenden Kapitel die wesentlichen Zielsetzungen des Service Engineerings vorgestellt. Im Anschluss werden verschiedene Ansätze und Vorgehensweisen, die im Rahmen des Service Engineerings entwickelt wurden, betrachtet. Abschließend erfolgt die vertiefende Betrachtung verschiedener Methoden und Werkzeuge des Service Engineerings.
Leistungssysteme
(2016)
Die Gestaltung von Leistungssystemen ist ein zentraler Prozess des Managements industrieller Dienstleistungen, da die kundengerechte Entwicklung einer aus Sachgütern und Dienstleistungen bestehenden Kombination von Leistungsbestandteilen hohe methodische Anforderungen stellt. Um die erforderliche Stimmigkeit des Leistungssystems zu erreichen, werden im folgenden Kapitel zunächst die grundlegenden Charakteristika sowie Gestaltungsprinzipien von Leistungssystemen dargestellt. Um den Erfordernissen von Kunden sowie einer internen Konsistenz des Leistungssystems gleichermaßen gerecht zu werden, sind für die Gestaltung von Leistungssystemen Methoden der Leistungsprogrammplanung, der Modularisierung sowie der Konfiguration von Leistungen erforderlich. Diese werden ebenfalls dargestellt und erläutert. Das Kapitel wird durch die Darstellung eines Dienstleistungsbaukastens ergänzt.
Ressourcen sind die Grundlage eines jeden Wertschöpfungsprozesses. Aus einer strategischen Perspektive können nur schwer imitierbare und einzigartige Kernkompetenzen die Grundlage eines langfristigen und nachhaltigen Wettbewerbsvorteils begründen. Demzufolge sind Ressourcen so auszuwählen, verfügbar zu machen sowie zu kombinieren, dass entsprechende Kompetenzen und Kernkompetenzen entwickelt werden. Dies ist die Aufgabe des strategischen Ressourcenmanagements. Allerdings unterscheiden sich die Auswahl und der Einsatz von Ressourcen zwischen Sachgütern und Dienstleistungen erheblich. Während bei Sachgütern die verwendeten Rohstoffe und Materialien oder die Produktionsbedingungen wesentliche Grundlage für die Qualität des Endprodukts sind, stehen bei Entwicklung, Vermarktung und Erbringung von Dienstleistungen die Mitarbeiter wesentlich stärker im Mittelpunkt. Daher stellt das Human-Resource-Management (HRM) den zentralen Ansatz für das Ressourcenmanagement industrieller Dienstleister dar. Aufgabe des HRMs ist es, die Mitarbeiter für die Entwicklung, Vermarktung und Erbringung von industriellen Dienstleistungen zu befähigen.
Produzierende Unternehmen in Industrienationen sehen sich einem immer stärkeren internationalen Wettbewerb ausgesetzt. Eine der entscheidenden Strategien, um diesem Wandel zu begegnen, ist die Differenzierung über industrielle Dienstleistungen.
Im folgenden Kapitel werden zunächst die Begriffe der Dienstleistungen und der industriellen Dienstleistungen inhaltlich gefasst und definiert. Danach wird die zunehmende wirtschaftliche Bedeutung industrieller Dienstleistungen für die Wirtschaft und für produzierende Unternehmen an sich aufgezeigt. Das Konzept des Leistungssystems wird vorgestellt. Abschließend werden verschiedene Perspektiven des Managements industrieller Dienstleistungen vorgestellt.
Due to the drastically increasing amount of data, decision making in companies heavily relies on having the right data available. Also because of an increasing complexity of structures and processes, quick and precise flows of information become more important.
This paper introduces a new approach for modelling information flows, creating a basis for an efficient information management. It can be used to structure the information requirements and identify gaps within the information processing.
To display its benefits, the proposed Information Logistics Notation (ILN) is applied to the information logistics of todays and future energy market and grid stability management, both processes of increasing complexity.
The manufacturing industry has to exploit trends like “Industrie 4.0” and digitization not only to design production more efficiently, but also to create and develop new and innovative business models. New business models ensure that even SMEs are able to open up new markets and canvass new customers. This means that in order to stay competitive, SMEs must transform their existing business models.
The creation of new business models require smart products. The required data base for new business models cannot be provided by SMEs alone, whereas smart products are able to provide a foundation, given the creation of smart data and smart services they enable. These services then expand functions and functionality of smart products and define new business models.
However, the development of smart products by small and medium-sized enterprises is still lined with obstacles. Regarding the product development process the inclusion of smart products means that new and SME-unknown domains diffuse during the process. Although there are many models regarding this process there appears to be a substantial lack of taking into account the competencies enabled by the implementation of digital technologies. Hence, several SME-supporting approaches fail to address the two major challenges these enterprises are faced with. This paper generally describes valid objectives containing relevant stakeholders and their allocation to the phases of the product life cycle.
Within each objective the potential benefit for customers and producers is analyzed. The model given in this paper helps SMEs in defining the initiation of a product development project more precisely and hence also eases project scoping and targeting for the smartification of an already existing product.
In order to introduce load management in the manufacturing industry, some obstacles need to be pointed out. This paper presents a feasible approach on how to implement load management measures in companies.
To this end, load management and energy management are explained and distinguished in a first step. Subsequently, the implementation method is introduced. Therefore, by means of this paper, companies will be enabled to use load management measures and significantly reduce their energy costs. In the second part of the paper, the introduced approach will be applied.
Hence, a use case of a manufacturing company is described. Alongside energy analyses with consumption data, specific measures are presented.
Die zunehmende Konzentration von Unternehmen auf ihre Kernkompetenzen und das Agieren auf einem weltweiten Markt führen zu einer stärkeren Kooperation in Unternehmensnetzwerken. Die Organisationsformen von Unternehmensnetzwerken können durch ihre Struktur und ihren Grad der Koordination beschrieben werden. Als Beispiel eines geführten und polyzentrisch strukturierten Unternehmensnetzwerks wird die Virtuelle Fabrik erläutert. Die Virtuelle Fabrik schafft Rahmenbedingungen für Unternehmen, um sich effizient in Ad-hoc-Kooperationen zu organisieren.
Nowadays, cyber physical systems support the improvement of efficiency in intralogistics by controlling and manipulating the production and logistic environment autonomously. Due to the complexity of the individual production processes, designing suitable cyber-physical systems based on their existing production environment is a challenge for companies.
This paper presents a new methodology on how to design cyber-physical systems conceptually to suit an individual production environment. Compared to existing design approaches, this methodology matches immediately the required functions to existing information and communication technology’s components insisting on the neutral assimilation of requirements.
Therefore, the requirement specification asks for needed functions in relating to offered functions of information and communication technology (ICT) components. The paper focusses the use case of implementing a cutting-edge mobile network technology into an existing tracking and tracing process.
Real-time data analytics methods are key elements to overcome the currently rigid planning and improve manufacturing processes by analysing historical data, detecting patterns and deriving measures to counteract the issues.
The key element to improve, assist and optimize the process flow builds a virtual representation of a product on the shop-floor - called the digital twin or digital shadow. Using the collected data requires a high data quality, therefore measures to verify the correctness of the data are needed. Based on the described issues the paper presents a real-time reference architecture for the order processing.
This reference architecture consists of different layers and integrates real-time data from different sources as well as measures to improve the data quality. Based on this reference architecture, deviations between plan data and feedback data can be measured in real-time and countermeasures to reschedule operations can be applied.