Refine
Year of publication
Document Type
- Article (3)
- Book (4)
- Part of a Book (3)
- Conference Proceeding (25)
- Contribution to a Periodical (1)
- Internet Paper (2)
- Preprint (1)
- Report (1)
- Working Paper (3)
Is part of the Bibliography
- no (43)
Keywords
- 02 (5)
- 3GPP (1)
- 5G (5)
- 5G mobile communication (2)
- 5G use case (1)
- 5G-Mobilfunk (1)
- 5G-Technology (1)
- Abschlussbericht (1)
- Agriculture (1)
- BITKOM (1)
Institute
- Informationsmanagement (43) (remove)
Feeding the growing world population is a scientific and economic challenge. The target variables to be optimised are the yield that can be produced on a given area and the reduction of the resources used for this purpose. High-wage countries are faced with the problem that the use of personnel is a significant cost driver. Developing countries, on the other hand, usually operate on much smaller field sizes, so that the work in the field is still strongly characterised by manual labour. One solution to meet these challenges is the use of smaller autonomous harvesting robots. These can be networked into a swarm of machines to work even larger fields. The networking of autonomous agricultural machines is a key use case for rural 5G networks. 5G technology can offer many advantages over older mobile communications standards and therefore make use cases more efficient or enable new ones. Various use cases are also conceivable in the field of agriculture, yet it is unclear how 5G networks can and must be specified for this purpose. In this paper, using the example of 5G-connected harvesters powered by swarm robotics, we present the challenges that have arisen and the specification that has been developed.
In road haulage, transports are interrupted by truck drivers to comply with driving and rest times. On long-distance routes, these interruptions lead to a considerable increase in transport time. Transport interruption can be avoided by so-called relay traffic: a vehicle (e. g. semi-trailer) is handed over to a rested driver at the end of the driving time. This type of transport requires a certain company size. In Germany, however, transport companies have 11 employees on average. Intra-company relay traffic is therefore not economically viable for most transport companies. To organize an intermodal transport across forwarding companies, long-distance routes need to be split into partial routes to divide them between freight forwarders and carriers. This paper presents a data concept for an algorithm to find the best possible route sections along a previously defined start and endpoint. The developed data concept includes order-specific data, forwarder-specific data, real-time traffic data, geographical data as well as data from freight forwarding software and telematics to be the basis for the route sectioning algorithm. In this paper, different data sources, external services and logistic systems are analyzed and evaluated. It is shown which data is needed and what the best ways are to select and derive this data from the different data sources.
Crises are becoming more and more frequent. Whether natural disasters, economic crises, political events, or a pandemic - the right action mitigates the impact. The PAIRS project plans to minimize the surprise effect of these and to recommend appropriate actions based on data using artificial intelligence (AI). This paper conceptualizes a cascading model based on scenario technique, which acts as the basic approach in the project. The long-term discipline of scenario technique is integrated into the discipline of crisis management to enable short-term and continuous crises management in an automated manner. For this purpose, a practical crisis definition is given and interpreted as a process. Then, a cascading model is derived in which crises are continuously thought through using the scenario technique and three types of observations are classified: Incidents, disturbances, and crises. The presented model is exemplified within a non-technical application of a use case in the context of humanitarian logistics and the COVID-19 pandemic. Furthermore, first technical insights from the field of AI are given in the form of a semantic description composing a knowledge graph. In summary, a conceptual model is presented to enable situation-based crisis management with automated scenario generation by combining the two disciplines of crisis management with scenario technique.
Künstliche Intelligenz (KI) hat sich über die letzten Jahre stetig zu einem Thema mit strategischer Priorität für Unternehmen entwickelt. Das zeigt sich nicht zuletzt in der gesteigerten Investitionsbereitschaft deutscher Unternehmen in KI-Projekte. Wirtschaftliche Akteure haben erkannt, dass durch eine sinnvolle Nutzung von KI-Technologien Wettbewerbsvorteile erzielt werden können. Die vorliegende Studie legt das Augenmerk auf den industriellen Einsatz einer KI-Technologie, die bereits heute von vielen Unternehmen erfolgreich genutzt wird: Die natürliche Sprachverarbeitung (engl. Natural Language Processing, kurz NLP). Die wirtschaftlichen Potenziale der Technologie liegen dabei in ihrer Fähigkeit, betriebliche Abläufe zu automatisieren und die Schnittstelle zwischen Mensch und Maschine zu verbessern und zu vereinfachen. Ziel der Studie ist es, die Potenziale der NLP-Technologie für Unternehmen nutzbar zu machen, indem konkrete Anwendungsfälle und allgemeine Handlungsempfehlungen sowie Nutzen und Risiken aufgezeigt werden.
The operation of CNC milling is expensive because of the cost-intensive use of cutting tools. The wear and tear of CNC tools influence the tool lifetime. Today’s machines are not capable of accurately estimating the tool abrasion during the machining process. Therefore, manufacturers rely on reactive maintenance, a tool
change after breakage, or a preventive maintenance approach, a tool change according to predefined tool specifications. In either case, maintenance costs are high due to a loss of machine utilization or premature tool change. To find the optimal point of tool change, it is necessary to monitor CNC process parameters during machining and use advanced data analytics to predict the tool abrasion. However, data science expertise is limited in small-medium sized manufacturing companies. The long operating life of machines often does not justify investments in new machines before the end of operating life. The publication describes a cost-efficient approach to upgrade legacy CNC machines with a Tool Wear Prediction Upgrade Kit. A practical solution is presented with a holistic hardware/software setup, including edge device, and multiple sensors. The prediction of tool wear is based on machine learning. The user interface visualizes the machine condition for the maintenance personnel in the shop floor. The approach is conceptualized and discussed based on industry requirements. Future work is outlined.
Technology management can significantly influence the strategic decisions of a company and thus cause success or failure. Basic templates for technology management are technology radars as well as the determination of the technology readiness level (TRL) to be able to evaluate the maturity of newly deployed technologies (e.g., newcomer vs. established). The radars, as well as the TRL, are identified in time-consuming, manual research by subject matter experts from external consultancies. This process is often repeated due to the further development and new development of technologies so that the necessary research becomes an ongoing task. The TechRad research project, therefore, aims to automate the identification of the TRL as well as technology radars using web crawling and Natural Language Processing (NLP). To commercialize the pre-competitive prototype, the development of a pre-competitive business model is the goal of this paper. Based on customer analyses, a target group definition is created. Based on user interviews, the precompetitive business model will be detailed in a four-step approach using a business model canvas and a value proposition canvas.
Klar Schiff
(2009)
Im Rahmen dieser Studie untersuchten das Forschungsinstitut für Rationalisierung e. V. an der RWTH Aachen und die Universität St. Gallen
(Lehrstuhl Produktionsmanagement) 24 Veröffentlichungen von 11 Beratungsunternehmen. Dabei wurden über 200 Aussagen zur Bewältigung der Krise bewertungsneutral identifiziert und analysiert.
Factory automation and production are currently
undergoing massive changes, and 5G is considered being a key
enabler. In this paper, we state uses cases for using 5G in the
factory of the future, which are motivated by actual needs of the
industry partners of the “5Gang” consortium. Based on these use
cases and the ones by 3GPP, a 5G system architecture for the
factory of the future is proposed. It is set in relation to existing
architectural frameworks.
Digitalization is changing the industrial landscape in a way we did not anticipate. The manufacturing industries worldwide are working to develop strategies and concepts for what is labelled with different terms such as the Industrial Internet of Things in the USA or Industrie 4.0 in Germany. Many industrialized economies are driven by the production sector and this sector needs specific approaches and instruments to take up other than those approaches we know from start-ups and ventures coming from Silicon Valley and other places. In this paper, we demonstrate an appropriate approach to transform producing companies in a systematic and evolutionary approach.
In particular, the objective of this paper is to provide results from two initiatives which conceptually build upon each other and are of particular relevance for the production industry. First, we present a global survey on the state of implementation and the future perspectives of the concept Industrie 4.0 from 2016. Findings from this study have forced parts of the German industry to heavily invest into a common approach to accelerate change towards Industry 4.0 in order to stay competitive in worldwide economy. This approach is presented in a second part.
Künstliche Intelligenz (KI) hat als Technologie in den vergangenen Jahren Marktreife erlangt. Es existiert eine Vielzahl benutzerfreundlicher Produkte und Services, welche die Anwendung von KI im Alltag und im Unternehmen vereinfachen. Die Herausforderung, vor denen Anwendende, gerade im betriebswirtschaftlichen Kontext, stehen, ist nicht die technische Machbarkeit einer KI-Applikation, sondern deren organisatorisch und rechtlich zulässige Gestaltung. Zu einer zunehmenden Dynamik in der Gesetzgebung kommt ein gesellschaftliches Interesse an der Kontrolle und Transparenz über die für KI-Modelle erhobenen Daten. Die Diskussion über Datensouveränität im geschäftlichen und privaten Alltag rückt mehr und mehr in das Zentrum der öffentlichen Aufmerksamkeit.
Datenbasierte KI-Anwendungen stehen damit in einem Spannungsfeld zwischen den Potenzialen, die das Erheben und Teilen von Daten über Unternehmensgrenzen hinweg bietet, und der Herausforderung, die Datensouveränität der involvierten Personen zu wahren. Die vorliegende Studie soll erstens über die Auswirkungen der Datensouveränität und die damit verbundenen aktuellen und kommenden Regularien auf KI-Anwendungsfälle aufklären. Dafür wurden Expertinnen und Experten aus den Bereichen Recht, KI- und Organisationsforschung befragt. Zweitens zeigt die Studie Potenziale und Best Practices von KI-Anwendungsfällen mit überbetrieblichem Datenaustausch auf. Dafür wurden Fallstudien in Unternehmen durchgeführt, die bereits erfolgreich Datenaustausch in ihre Geschäftsmodelle integriert haben, um ihre KI-Applikationen zu betreiben und zu verbessern.