Refine
Year of publication
Document Type
- Article (1)
- Part of a Book (9)
- Conference Proceeding (37)
- Contribution to a Periodical (1)
- Lecture (1)
Language
- English (49) (remove)
Is part of the Bibliography
- no (49)
Keywords
- 02 (4)
- 03 (3)
- APMS (1)
- APS (1)
- Adaptability (1)
- Advanced Planning System (1)
- Anomaly detection (1)
- Auftragsabwicklung (1)
- Beschaffungsplanung (1)
- Best practices (1)
Institute
- Produktionsmanagement (49) (remove)
The topics Internet of Things and Industry 4.0 increasingly lead to the fact that the customer is increasingly focused on manufacturing companies. He wants to know delivery date of the product, wants to make changes at short notice, get an individualized product and much more. Technologically, these requirements have already been met, but the structures within the company as well as the operational processes are not yet or only partially prepared to cope with the increasing complexity and dynamics of production. This leads to many deviations with which the production controller must deal, whether they are complex or trivial.
In order to counteract the increasing number and frequency of deviation situations which are currently encountered with complex manual interventions, it is necessary to systematically evaluate deviations and then to allocate them a dominant reaction strategy (manual, partially automated, automated) from which a suitable reaction measure can be derived. This relieves the production controller, since assistance systems partially eliminate deviations independently.
As a result, the production controller gets more time to deal with the cause of deviations so that a new occurrence of deviations can be avoided and the number of deviations can be reduced sustainably. The following paper provides a solution for the assessment of deviations. In addition, it includes differentiation logic to allocate one of the three different reaction strategies to the identified deviation.
Production in high-wage countries can be made more efficient, cost-effective, and flexible by solving the conflict between planning and value orientation. A promising approach is to focus on planning and decision-making processes (production planning and control, design of production processes and machinery, etc.) and to aim to maximize overall planning efficiency. Planning efficiency can be expressed as the ratio between the benefit generated by preparing detailed process instructions to produce the parts or components and the corresponding planning efforts. Industrial companies wanting to gain a competitive advantage in dynamic global markets have to identify a set of non-dominated solutions with the most favorable effort–benefit ratio rather than a single solution. The optimum between detailed planning and the immediate implementation of value-adding activities (process steps) in the process chain needs to be found dynamically for each product.
This research area focuses on the management systems and principles of a production system. It aims at controlling the complex interplay of heterogeneous processes in a highly dynamic environment, with special focus on individualized products in high-wage countries. The project addresses the comprehensive application of self-optimizing principles on all levels of the value chain. This implies the integration of self-optimizing control loops on cell level, with those addressing the production planning and control as well as supply chain and quality management aspects. A specific focus is on the consideration of human decisions during the production process. To establish socio-technical control loops, it is necessary to understand how human decisions are made in diffuse working processes as well as how cognitive and affective abilities form the human factor within production processes.
Real-time data analytics methods are key elements to overcome the currently rigid planning and improve manufacturing processes by analysing historical data, detecting patterns and deriving measures to counteract the issues.
The key element to improve, assist and optimize the process flow builds a virtual representation of a product on the shop-floor - called the digital twin or digital shadow. Using the collected data requires a high data quality, therefore measures to verify the correctness of the data are needed. Based on the described issues the paper presents a real-time reference architecture for the order processing.
This reference architecture consists of different layers and integrates real-time data from different sources as well as measures to improve the data quality. Based on this reference architecture, deviations between plan data and feedback data can be measured in real-time and countermeasures to reschedule operations can be applied.
Working capital management is one of the key disciplines that must be prudently monitored for a firm in pursuit of profits, liquidity and growth. The focus of this paper is on the engineer-to-order manufacturers, and the objective is to analyze the correlations between the reference processes of the engineer-to-order production approach with the key postulates of working-capital management and deliver a mathematical operating curves model, whose purpose and goal is basing on the rationale, that is underlying in the parent logistic operating curves theory. [https://link.springer.com/chapter/10.1007/978-3-319-66926-7_30]
In this paper, we firstly present a target system which is deduced to assess the economic profitability of reverse supply chains. Considering this, we analyse process reference models to define relevant components of an appropriate target system.
Subsequently, we define applicable business models which are the basis for the manufacturer to offer new services to its customers on the one hand and to manage a goal-oriented return, recovery and resell of used products and components on the other hand. This will be done based on the morphology methodology in order to understand the characteristics and attributes of reverse supply chains.
Today, manufacturing companies are facing the influences of a dynamic environment and the continuously increasing planning complexity. Using advanced data analytics methods, processes can be improved by analyzing historical data, detecting patterns and deriving measures to counteract the issues. The basis of such approaches builds a virtual representation of a product – called the digital twin or digital shadow.
Although, applied IT systems provide reliable feedback data of the processes on the shop-floor, they lack on a data structure which represents real-time data series of a product. This paper presents an approach for a data structure for the order processing which overcomes the described issue and provides a virtual representation of a product. Based on the data structure deviations between the production schedule and the real situation on the shop-floor can be identified in real time and measures to reschedule operations can be identified.
One of the major challenges facing today´s manufacturing industry is to differentiate from competition in a highly globalized world. As a consequence to the increasing competitive pressure, many companies transform their product centered business models towards service based business models to differentiate from competition. However, the transformation is often underestimated regarding its complexity and its management challenges to behavioral change.
As a consequence lots of transformation initiatives fail. Besides difficulties in structuring the magnitude of changes in processes and structures, many transformation managers do not perceive the risk of employee resistance against changes, which is one of the key factors causing the failure of transformation. The objective of this paper is to enhance the existing body of research on manufacturer´s organizational transformation towards Product-Service Systems. More detailed, the objective is to develop new knowledge to support the management during the decision-making process in the way how and by means of which instruments the change of behavior can be supported when transforming from a manufacturer to a solution.
We developed a reference framework which structures and defines the relevant dimensions of behavioral change. The identification and validation of the success factors build the second component of our research. We conducted an empirical investigation in the German manufacturing industry and got 79 data sets.
Structural equation modelling was applied for the analyses and the validation of the hypotheses. By this analysis we linked management practice with employee behavior and transformational success variables. On the basis of the gained insights decisions can be made concerning the successful transformation from manufacturer to a solution-oriented service provider.
One major problem of today’s producing companies is to reach a high adherence to delivery dates while considering the volatile market situation as well as economic aspects. This problem can only be solved by using a production control that is optimally adapted to the processes. A good working, process-oriented production control is essential for being able to control the production situation and to ensure a high adherence to delivery dates. Data generation and processing determine the success of production control. Current processes and IT systems have several shortcomings in meeting these challenges.
The solution for this problem is the so called “cyber physical production control” (CPPC). It optimally supports the production scheduler in his decision making process based on real-time high-resolution data. With the help of data analytics, the production controller receives decision support over various steps. Due to CPPC, the overall goal of a high adherence to delivery dates can be fundamentally increased.
In recent years supply chain participants are increasingly suffering the effects of disturbances in transportation supply chains. Both, dynamics in consumer demands and global supply chains lead to a growth in unplanned supply chain events. These can cause from rather manageable disturbances through to complete break-downs of transportation chains, resulting in high follow-up and penalty costs.
Consequently, concepts for an efficient supply chain disturbance management are needed, preferably with a real-time identification and reaction to disturbance events. Therefore in the following paper the research results of the German research project Smart Logistic Grids with the focus on designing an integrated model for the real-time disturbance management in transportation supply networks are presented. This includes the introduction of elaborated classification models for disturbances and action patterns as well as an associated costs and performance measurement system. Finally, a procedure model for the disturbance management is presented.
The steady increasing of supply chain complexity due to a rising global cross-linking of production and sales regions leads to an increasing sensitivity to disturbances while in the meantime the requirements of the availability, the time of delivery and the security of supplies within the supply chain increases. To meet this challenges the security of the supply chain infrastructure and the feasibility of supply chain processes need to be ensured, despite of the high specialization within the supply chain partners, the low stock and time buffers, and the information shortcoming between supply chain partners.
In this research, a System Dynamics simulation model, based on the manufacturing supply chain model of Sterman, has been developed for representing the actual complexity and dynamic in manufacturing supply chains. Therefore, the modeled manufacturing supply chain shows the processes of a four level supply chain focusing the processes and interactions of the mid-positioned two supply chain participants. The main contribution of the work described in this paper, is the description and implementation of necessary additional modules and parameters to Sterman’s basic model for the diagnosis of disturbance impacts as well as for the realization of supply chain adjustments. Finally, the model has been simulated and examined for realistic values.
Volatile electricity prices caused by an increase of renewable energy sources push producing companies towards taking in an active role in balancing the electricity grid. Possible actions at the customer side to actively adapt to volatile energy prices are called demand response actions. In production logistics such actions can be the modification of production schedules motivated by possible economic benefits. So far, the focus in scheduling problems has been the optimization in the dimensions of quality, time and costs. This paper presents the results of a simulation study on the economic benefits of demand response actions for a generic production system.
Applying Game Theory in Procurement. An Approach for Coping with Dynamic Conditions in Supply Chains
(2014)
Producing companies are facing continually changing conditions accompanied by higher requirements with respect to the flexible configuration of their supply chain. The challenge resulting from this initial situation is to develop systems that have the availability of adjusting their planning procedures and aims depended on the situation and therefore accommodate the increasing demand for flexibility. To address this challenge game theory seems to be a new and promising approach. The aim and added-value of the research work described here is to develop a decision model for the area of procurement using solutions concepts of game theory. Especially in times of high volatility such a decision model can support material requirements planners better than today's common selective planning logics.
In this paper the model to be solved by game theoretic solution concepts is presented. A research study has been conducted which proved the need for combining existing methods of procurement quantity calculation by means of game theoretic solution concepts. Some of the results of this study are presented in this paper. In the last part of the paper a structure for classifying game theoretic models is presented. This structure should support in selecting the appropriate solution concept for real-life decision-situations and is able to support in any practical application-field finding out the most appropriate game theoretic solution concept.
Human behavior in supply chains is insufficiently explored. Wrong decisions by decision makers leads to insufficient behavior and lower performance not only for the decision maker, but also for other stakeholders along the supply chain. In order to study the complex decision situation, we developed a supply chain game in which we studied experimentally the decisions of different stakeholder within the chain. 121 participants took part in a web-based supply chain game. We investigated the effects of gender, personality and technical competency on the performance within the supply chain. Also, learnability and the effect of presence of point-of-sale data are investigated. Performance depended on the position within the chain and fluctuating stock levels were observed in form of the bullwhip effect. Furthermore, we found that risk taking had an impact on the performance and that the performance improved after the first round of the game. [https://link.springer.com/chapter/10.1007/978-3-642-39226-9_46]
Producing companies are confronted with a growing number of product ramp-ups, since product life cycles are decreasing and product diversity is increasing. Production Planning and Control (PPC) of ramp-up products is particularly challenging, as there is a significant lack of reliable experienced data.
The information deficit is exceptionally high for the first step of PPC process, namely Production Program Planning (PPP). The paper in hand proposes an innovative approach of cybernetic PPP that enables companies with numerous ramp-ups to design reliable and fast PPP processes that can react highly adaptable on unpredictable environmental disturbances. The Viable System Model (VSM) is used as frame of reference for the design of PPP processes in line with principles from management cybernetics.
Production systems are exposed to an increasing planning-related uncertainty and susceptibility. The inter-company coordination has not sufficiently been considered in contemporary concepts of supply chain management. Against this background, it is crucial to provide a suitable tool that increases the planning capability of the players and the robustness of the supply chain as a whole. Therefore, this article provides the relevant causes and effects of planning uncertainties within the production planning and presents based on that an inter-company supply chain planning concept.
A company can choose between three generic competitive strategies. Alongside the strategy of cost leadership are the strategy of differentiation and the strategy of focussing on niches, although we will not be discussing this latter any further here. The strategy of cost leadership is based on the achievement of “economies of scale”, so generating advantage from the benefits of cost reduction, learning curve effects and automation. In the strategy of differentiation the focus is on “economies of scope” which enable the customer-specific products to be offered, but this is generally achieved only with an increase in the complexity of products and processes. In the past it was assumed that these two strategies were mutually exclusive, as an increase in the economies of scale basically leads to a reduction in the economies of scope, and vice versa. But in order to survive in the international competitive arena companies in the high-wage countries need increasingly to offer individually tailored products at competitive prices. The target to be aimed at is therefore customer-specific products at the cost of mass production, so resolving the dilemma between economies of scale and economies of scope. For this it is necessary to optimise the alignment of all the structural elements in both the product and its production, because of the high level of their interdependence.
The areas on which we will focus our review and designs in the following will be what are known as product-production systems, or more briefly, production systems. This topic includes not only the resources and processes of the value creation systems, but also the products produced and offered on the market by a company as one connected entity. In order to tackle the challenges mentioned above, it is necessary to make it possible to measure and compare the current position of any given production system on the see-saw between economies of scale and economies of scope, and then be able to redesign specific facets of them as a second phase. A method of integrative evaluation and design of production systems is presented below for this purpose.
Industrial production in high-wage countries like Germany is still at risk. Yet, there are many counter-examples in which producing companies dominate their competitors by not only compensating for their specific disadvantages in terms of factor costs (e.g. wages, energy, duties and taxes) but rather by minimising waste using synchronising integrativity as well as by obtaining superior adaptivity on alternating conditions. In order to respond to the issue of economic sustainability of industrial production in high-wage countries, the leading production engineering and material research scientists of RWTH Aachen University together with renowned companies have established the Cluster of Excellence “Integrative Production Technology for High-Wage Countries”. This compendium comprises the cluster’s scientific results as well as a selection of business and technology cases, in which these results have been successfully implemented into industrial practice in close cooperation with more than 30 companies of the industrial production sector.
Maximising economies of scale in individualised production is a vital issue for producing companies in high wage countries. A decisive enabler for this is the management of product and process complexity by systematic standardisation. Due to the strong and far-reaching impact of complexity on the value added chain, its management requires an integrative consideration of the entire product and production system.
The following paper introduces a methodology facing this challenge. The core element of this methodology is an integrative and complexity-focused assessment model. This assessment model has been validated experimentally by analysing key company data from more than 50 German toolmaking firms. Findings of this empirical investigation are presented in this paper.
Manufacturing companies of the machinery and equipment industry find themselves more than ever exposed to a rapidly changing competitive environment. In particular, the resulting diversity of planning and control processes confronts organisations and information systems with a significant coordination effort. To this day, planning and execution of order processing – from offer processing to the final shipment of the product – is still a part of the production planning and control (PPC), which is almost entirely integrated into information systems. Though, in order to manage dynamic influences on processes within order processing, there can be found a deficiency in the processing of decision-relevant and real-time information. Partly, the reason for this is a missing or incorrect feedback of process relevant data, so that the planning results, gained by the use of information systems, differ to the current process situation.
The concept of Manufacturing Resource Planning (MRP II) still represents the central logic of production planning and control. However, the centralised and push-oriented MRP II planning logic is not able to plan and measure dynamic processes adequately, which, due to diverse disturbances, often occur in production environments. Furthermore, specific weaknesses of MRP II-based systems are the lack of support for order releases, the planning principle based on average values and the successive planning method as well as the use of limited partial models. As a result a successive planning method leads to a dissection of PPC-tasks into smaller work packages and so strides away from a holistic approach and the achievement of an optimal solution. Similarly, a planning, focusing on a general business objective system, using a partial planning approach due to isolated considerations is not possible. Insufficient consideration of the current load horizon and the current capacity utilization, non-existing or delayed feedback on order progress as well as faults and poor availability and transparency of information can be named as further weaknesses of MRP II-based systems.
One of the central success factors for production in high-wage countries is the solution of the conflict that can be described with the term “planning efficiency”. Planning efficiency describes the relationship between the expenditure of planning and the profit generated by these expenditures. From the viewpoint of a successful business management, the challenge is to dynamically find the optimum between detailed planning and the immediate arrangement of the value stream. Planning-oriented approaches try to model the production system with as many of its characteristics and parameters as possible in order to avoid uncertainties and to allow rational decisions based on these models. The success of a planning-oriented approach depends on the transparency of business and production processes and on the quality of the applied models. Even though planning-oriented approaches are supported by a multitude of systems in industrial practice, an effective realisation is very intricate, so these models with their inherent structures tend to be matched to a current stationary condition of an enterprise. Every change within this enterprise, whether inherently structural or driven by altered input parameters, thus requires continuous updating and adjustment. This process is very cost-intensive and time-consuming; a direct transfer onto other enterprises or even other processes within the same enterprise is often impossible. This is also a result of the fact that planning usually occurs a priori and not in real-time. Therefore it is hard for completely planning-oriented systems to react to spontaneous deviations because the knowledge about those naturally only comes a posteriori.
Companies in high wage countries are increasingly confronted with the challenge of optimizing economies of scope and economies of scale simultaneously to succeed on a global market place. An integrated assessment of production systems facing this challenge is essential to evaluate the actual state of a company and to provide a basis for drawing the right conclusions to reconfigure production systems successfully.
In this paper an integrated model for measuring economies of scope as well as economies of scale is introduced, defining the fundamental domains of a production system. The major objectives resulting from the overall scale-scope dilemma are broken down for each domain and the main dimensions for an assessment of each domain are defined. A new measure named Degree of Efficiency is defined, quantifying the fulfillment of the opposing objectives in each domain and hence, the contribution to an overall resolution of the scale-scope dilemma.
The efficient dealing with the dynamic environment of production industries is one of the most challenging tasks of Supply Chain Management in high-wage countries. Relevant and current information are still not used sufficiently, to handle the influence of the dynamic environment on intra- and inter-company order processing adequately. Among other things, the problem is caused by missing or delayed feedback of relevant data. As a consequence of that, planning results differ from the actual situation of production. High Resolution Supply Chain Management describes an approach aiming on high information transparency in supply chains in combination with decentralized, self-optimizing control loops for Production Planning and Control. The final objective is to enable manufacturing companies to produce efficiently and to be able to react to order-variations at any time, requiring process structures to be most flexible.
In a subproject of the cluster of excellence “Integrative Production Technology for High-Wage Countries” at RWTH Aachen University a configuration logic is under development that enables companies to configure their production system according to the dynamic requirements of the market. As a result of this project, a holistic description model for production systems has been defined. With numerous attributes in the sub-models a detailed characterization of the production system is possible.
The sub-model for the design of the supply chain will be depicted in detail in this paper. Representative for the design of a supply chain, the spare parts logistics of the wind energy industry is analyzed in depth. Designing this supply chain is not only one of the most challenging tasks in logistics. Only a responsive but also cost efficient design of the spare parts supply chain guarantees high productivity, extended life spans of the wind turbines as well as the expected profit for all companies in the supply chain.
Within each of the three design fields numerous design elements exist (e.g. degree of centralization, number of warehouses etc. in the field network design). Hence, the interdependencies of all design elements have to be analyzed to allow optimal decisions for the design of an efficient and effective spare parts logistics. Nevertheless, the complexity among all interdependencies can hardly be understood. Therefore it is necessary to reduce the complexity of design decisions by focusing on the most important design elements according to the logistical requirements of different spare part categories. In order to achieve this goal, a classification of spare parts in terms of their key characteristics has been developed. For different spare part categories only a smaller set of design elements and their interdependencies has to be taken into account. The reduced number of key design elements per spare part category can be analyzed and understood in depth. Thus a Systems Dynamics approach is used to allow a better configuration of network design, cooperation concepts and inventory management in spare parts Supply Chains on the basis of specific logistics requirements of different spare part categories.
In dynamic markets flexible and efficient production systems are the main success factor for companies. The production system in this context includes all five phases of the SCOR-Model: Source, Make, Deliver, Plan and Return. In a subproject of the cluster of excellence "Integrative Production Technology for High-Wage Countries" at RWTH Aachen University, a configuration logic is being developed that enables companies to configure their production system according to the dynamic requirements of the market. As a major intermediate result, a holistic description model for production systems has been defined. In combination with numerous attributes in the sub-models, a detailed characterization of the production system is possible.
The sub-model for the design of the Supply Chain (mainly Deliver) will be depicted in detail in this paper. Representative for the design of a Supply Chain, spare parts logistics - as one of the most challenging tasks in logistics planning - is analyzed in depth. For this purpose spare parts logistics is divided into three design fields: network design, cooperation concepts (e.g. with logistics providers, customers, suppliers) and inventory management. Decisions in the design fields are highly interdependent, any spare parts logistics configuration has to take these interdependencies into account.
Rebound Logistics
(2009)
Today, the flow of product returns is becoming a significant concern for many manufacturing companies. In this research area, three fundamental aspects of product returns need to be taken into consideration: First, companies become increasingly aware of the fact that product returns may offer an opportunity for enormous profit generation and for improving the competitive advantage of a manufacturing company when taking into account the accretive value of the products and technology. Second, the impact of green laws, legislative provisions and the increasing impact of a sustainable production management due to marketing aspects force companies to design and manage the reverse supply chain actively. Third, the importance of managing the reverse supply chains effectively will be enforced by the currently volatile economic climate. This paper outlines first results of designing a methodological framework for implementing an integrative reverse supply chain for manufacturing companies based on a type-specific Reverse Supply Chain Reference Model.
Due to shorter product life cycles the number of production ramp-ups is increasing, while customers have a soaring demand for more variable and individualized products. In the future, optimizing the production ramp-up will become an important differentiation criterion for companies. Considering the whole supply chain in the ramp-up process becomes therefore indispensable. This is what the presented research in this paper concentrates on. The intention of the research project is to develop a model of a supply chain in the production ramp-up stage. Through this model, approaches for optimizing the production ramp-up in the whole supply chain will be derived.
Further the research project concentrates on measuring the production ramp-up performance in the supply chain, showing the impact on economic and financial measures. The result of this research is an approach to align the tasks and objectives of Supply Chain Management with the tasks and objectives of ramp-up management in order to optimize the whole supply chain in the ramp-up stage.
Outsourcing of logistics operations (especially transportation, distribution & warehousing) is one of the most viable options exercised by the customers to excel in their logistic operations. Despite the growing outsourcing of logistics services to 3PL providers, both the service providers & their customers are facing tremendous problems in synchronizing the business processes & analyzing the performance using common key performance indicators. There is a huge demand for an integrated approach to help 3PL and their customers better synchronize their business processes and have common goals & perspectives. Such integrated approaches often take shape of a process oriented reference model covering many diverse aspects related to the operations & controlling of any business. In this paper, an integrated reference model to support 3PL service operations is presented. The Logistics Reference Model (LRM) developed & validated in some 3PL service companies encompasses standard business processes, performance measurement system and best practices.